Instructions – Parts List Lube Equipment Couplers, Adapters, Nozzles, and 306708H Z-Swivels ENG Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 Copyright 2002, Graco Inc. is registered to I.S.
Pressure Relief Procedure Symbols 1. Turn off the power supply to the pump. Warning Symbol 2. Trigger the valve into a waste container to relieve pressure. WARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. 3. Open any bleed-type master air valves and fluid drain valves in the system. 4. Leave the drain valve open until you have completed repairs and are ready to pressurize the system.
WARNING WARNING SKIN INJECTION HAZARD Spray from the dispensing valve, leaks or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. D Fluid injected into the skin may look like just a cut, but it is a serious injury. Get immediate surgical treatment. D Do not point the dispensing valve at anyone or at any part of the body.
Adapters Hydraulic Adapter Accessory Kit 205592 Hydraulic-to-Nylon Needle Adapter 205582 See the separate listing for each kit component for replacement parts and maximum working pressures. 250 psi (18 bar) Maximum Working Pressure For removable plugs Ref. No. Part No.
Adapters 90_ Lube Adapter 223187 High Pressure Adapters 250 psi (18 bar) Maximum Working Pressure Locking Sleeve Connector 203497 Ref. No. Part No. Description 1 2 3 4 203497 185914 151249 156563 CONNECTOR, locking sleeve ADAPTER NIPPLE TIP, nozzle Qty. 6000 psi (420 bar) Maximum Working Pressure For quick connection to taper nose coupler 1 1 1 1 03593 360_ Grease Swivel & Coupler Kit 203597 1 6000 psi (420 bar) Maximum Working Pressure 3 2 Ref. No. Part No.
Grease Nozzles Hose Nozzle 204204 Standard Grease Nozzle 200389 5000 psi (350 bar) Maximum Working Pressure 8000 psi (560 bar) Maximum Working Pressure REF NO. Ref. No. Part No. Description 1 2 3 4 200325 151277 100451 109145 HYDRAULIC, coupler 1 TUBE, adapter; 2.5 in. (64 mm) long 1 COUPLING, pipe; 1/8 npt 1 HOSE, coupled; 1/8 npt(m); 0.25” (6.4 mm) ID; 12 in. (305 mm) long1 Qty. PART NO. DESCRIPTION 1 2 200325 QTY TUBE, adapter; 1/8 npt(m); 6 in.
NOTES 306708 7
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.