User's Manual

ManualsBrandsGraco ManualsDo-It-Yourself tools307252P

Instructions--Parts List

307252P

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

HIGH PRESSURE, MEDIUM VOLUME

“red alert” Filters

For filtration of common industrial paints and coatings in finishing

applications. For professional use only.

3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure

10 gpm (38 liter/min) Flow Capacity

36 sq. in. (230 cm

) Filtering Area

Part No. 210090, 60 mesh (250 micron) element 108116

Part No. 210091, 100 mesh (149 micron) element 108117

Part No. 210092, 200 mesh (74 micron) element 108118

Part No. 104435, without element

03731

Summary of content (6 pages)

PAGE 1
Instructions--Parts List HIGH PRESSURE, MEDIUM VOLUME “red alert” Filters 307252P EN For filtration of common industrial paints and coatings in finishing applications. For professional use only. 3000 psi (21.0 MPa, 210 bar) Maximum Working Pressure 10 gpm (38 liter/min) Flow Capacity 36 sq. in. (230 cm 2) Filtering Area Part No. 210090, 60 mesh (250 micron) element 108116 Part No. 210091, 100 mesh (149 micron) element 108117 Part No. 210092, 200 mesh (74 micron) element 108118 Part No.
PAGE 2
WARNINGS High Pressure Spray Can Cause Serious Injury. Observe All Warnings. Read and understand all instruction manuals before operating equipment. SKIN INJECTION HAZARD General Safety Pressure Relief Procedure This equipment is used in a system which generates very high fluid pressure. Spray from leaks or ruptured components can inject fluid through your skin and into your body and cause extremely serious bodily injury, including the need for amputation.
PAGE 3
Installation To clean or service the filter without shutting down the system, install a dual filter or a filter bypass system as explained below. The numbers and letters in parentheses refer to Figs. 1, 2, and 3 and the Parts Drawing. Accessories and Technical Data are on the page 5. IN OUT NOTE: Allow 3 in. (76 mm) minimum clearance below the filter for easy removal of the bowl (10).
PAGE 4
Service CAUTION If the filter will not be used for a while, thoroughly clean all the parts in solvent and blow them dry before the paint dries and clogs the filter. To help prevent damaging the parts, do not clean them with a wire brush or sharp object. Indicator The indicator provides gradual warning of a dirty element. When the indicator shows 3/4 red, clean the element. If not cleaned promptly, the filter bypass valve opens and fluid will not be filtered.
PAGE 5
Parts Model No. 210090 to 210092 Includes items 1 to 12. 1 3/4” npt(f) Inlet and outlet 2 3/4--16 unf (f) drain port Model No. 104435 Includes items 1 to 7, 9 to 12; Order the filter element separately from those listed under Ref. No. 8. 3 Ref. No. Part No.
PAGE 6
The Graco Warranty and Disclaimers WARRANTY Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. As purchaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment proven defective.