Instructions – Parts List Fluid Outlet Filter 307273ZAD EN For filtering of finishing materials. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 2 for maximum working pressures. Table of Contents List of Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Models Part No.
Symbols Warning Symbol Caution Symbol WARNING CAUTION This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. WARNING EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. INSTRUCTIONS D This equipment is for professional use only.
WARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. D Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment. D Do not point the gun at anyone or at any part of the body. D Do not put your hand or fingers over the spray tip.
Installation Install a suitable adapter in the 3/8 npt filter inlet (Model 240183 has a 1/2 npt inlet). Then install the filter downstream from the pump fluid outlet. 5 3 Install a suitable adapter in the filter outlet. Models 236789, 237480, 237481, 238782, 241107, and 248851 have a 3/8 npt outlet, and Models 240183, 24U609, and 24F658 have a 1/2 npt outlet; the others have a 1/4 npt outlet. Connect the spray hose to the filter outlet.
Maintenance Cleaning the Filter Dried paint sediment can clog the filter screen and greatly reduce filtering ability. Dried paint also makes the filter difficult to remove. Clean the filter regularly; daily if needed, following the procedure below. CAUTION To avoid damaging parts, never force them apart. If any parts are stuck tightly together, soak them in a compatible solvent before disassembling them. Be careful not to drop or damage the filter housing and bowl.
Parts Model 214570, Series B Model 236789, Series A 1 1 7 7 8 8 5n 5n 6 6 3n 3n 4 4 9 9 2 2 02529 Ref No. Part No.
Parts Model 218029, Series B Model 241317, Series A Model 24V925, Searies A Model 24T914, Series A Model 223160, Series B Model 24A587, Series B 1 7 7 8 8 5n 5n 6 6 1 Used only on 241317 3n 10 3n 1 9 4 9 4 4 11 1 9 1 2 10 Model 223160 02530B Ref. 3n 4 5n Part No. 104361 162453 167025 167024 167026 6 7 8 9 10 11 186075 24C501 246582 179773 171941 171942 100509 157350 8 307273 Description Qty.
Parts Model 239800, Series A Model 240183, Series A 1 7 7 8 8 5n 5n 6 6 3n 3n 4 9 9 ti11575a 2 ti11574a Ref. No. Part No.
Parts Model 238782, Series A Model 248851, Series A 5 4 7 3 8 5n 3 1 6 3n 2 9 TI15371A Ref. No. Part No. Description 3n 5n 6 7 8 9 104361 167024 186075 196290 171941 193331 O-RING; PTFE SCREEN, stainless steel; 30 mesh SUPPORT, filter; polyethylene BOWL, filter; stainless steel SPRING, compression; stainless steel HOUSING, filter; stainless steel n Keep these spare parts on hand to reduce down time. 10 307273 Qty. 1 1 1 1 1 1 Ref No. Part No.
Parts Model 239060, Series A Model 239244, Series A 1 18 15 6 7 6 7 8 n3 n5 4 9 10 8 17 n3 n5 10 9 12 16 12 13 14 19 7001A Ref. No. Part No.
Parts Model 239962, Series A Model 239964, Series A 18 21 18 22 9 9 16 20 17 17 16 10 17 3n n5 3n n5 6 8 8 7 7 15 15 6 12 12 8018 Ref. No. Part No.
Parts Model 239063, Series A Model 24F658, Series A 18 1 15 7 6 7 6 8 n3 n5 4 17 n3 9 2 8 n5 9 12 16 13 12 19 14 13 7003A Ref No. Part No.
Parts Model 239963, Series A Model 239961, Series A 18 18 21 22 9 9 16 16 20 17 10 17 17 3n 3n n5 n5 6 8 6 8 7 7 15 15 12 12 8019 Ref. No. Part No.
Parts Model 240169, Series A Model 240170, Series A 22 10 22 10 9 9 16 16 10 10 n3 n5 n3 n5 6 17 6 17 8 8 7 7 15 15 12 12 8021 Ref. No. Part No.
Parts Model 239286, Series A Model 237481, Series A Model 241107, Series A 1 1 7 8 7 8 5n 5n 6 6 3n 3n 2 2 4 10 4 11 4 10 9 9 06952 Ref No. Part No. 1 2 3n 4 5n 6 7 8 9 10 100040 155699 104361 162485 167025 186075 172831 171941 190097 164672 11 239285 Description 16 307273 Qty.
Parts Model 24F620, Series A Model 24U609, Series A 18 1 16 17 8 7 n3 9 7 6 8 6 15 n5 3n 12 n5 9 14 13 18 19 13 10 12 14 20 TI22357A TI19255a Ref. No. Part No.
Accessories Use Only Genuine Graco Parts and Accessories High Pressure Ball Valves 5000 psi (350 bar) Maximum Working Pressure Install in outlets for individual line control or install in bottom of filter bowl for draining fluid.
Technical Data Category Data Maximum Working Pressure Model 214570, 236789, 237481, 239286: 3000 psi (21 MPa, 210 bar) Model 239963: 4000 psi (28 MPa, 280 bar) All other models: 5000 psi (35 MPa, 350 bar) Fluid Inlet Models 240183, 24U609, and 24F658: 1/2 npt All other models: 3/8 npt Fluid Outlets Models 240183, 24U609, and 24F658: 1/2 npt Model 236789, 237481, 238782, 241107, 248851: 3/8 npt All other models: 1/4 npt Diameter All models: 2.25 in. (60 mm) Height All models: 8.5 in.
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
