User's Manual

308394B
EN
INSTRUCTIONS- PARTS LIST
K
Pump Mounting
Bracket
Used to mount Dyna-Star or Power-Star pumps to a wall
Model 236778
Includes hardware to mount to a stubby-size 1/4:1 ratio
Dyna-Star
Pump or a 1:1 Power-Star Pump
to a wall.
Model 203987
Includes hardware to mount to a stubby-size 1:1
Dyna-Star, 1:1 Fast-Ball, 10:1 President, 3:1 Eagle, or
5:1 ration Fire-Ball Pump to a wall.
Installation
Mounting the Pump Bracket (FIG. 1)
1. When determining where to mount the bracket, consider
the following things:
a. Location of the permanent supply lines from the
pump to the outlet
b. Type of connections required
c. Ease in moving drums
d. Stress caused on the wall by the weight of the pump,
pumping operation, hoses, and fluid
2. See FIG. 2. Refer to the following table for nominal screw
size to mount the pump bracket. Use screw and lock
washer of the appropriate type and length for your installa-
tion
.
Dimensions
Important Safety Instructions
Read all warnings and instructions in this
manual and your pump manual. Save all
instructions.
Model Screw Size, in. (mm)
236778 1/2 (12)
203987 3/8 (10)
Model X in. (mm) Y in. (mm) Z in. (mm)
236778 6-1/4 (159) 6-1/4 (159) 9/16 (14)
203987 4-1/8 (105) 5-1/8 (130) 7/16 (11)
FIG. 1
x
Y
z
.
KEEP FOR REFERENCE

Summary of content (2 pages)