User's Manual

308771 11
Technical Data
Category Data
Maximum fluid working pressure 300 psi (2.1 MPa, 21 bar)
Maximum operating temperature 150_F (66_C)
Maximum heater voltage and
amperage
Part No. 239850: 120 VAC, 19.2 Ampere
Part No. 241883: 200 VAC, 20.0 Ampere
Part No. 239851 and 239852: 240 VAC, 16.7 Ampere
Wetted parts Fluid Heater: See heater manual 309524.
Fluid Fittings: Stainless steel.
Fluid Hoses: Nylon.
Mounting Hole Layout
7687A
1.0 in. (25.4 mm)
4.0 in.
(101.6 mm)
10.0 in.
(254 mm)
5.0 in.
(127 mm)
1
1
Check that the bracket is level before bolting it to the wall.
2
2
7761A
1.44 in.
(36.63 mm
)
6.25 in.
(158.8 mm)
0.88 in.
(22.4 mm)
5 in.
(127 mm)
6.75 in.
(171.7 mm)
1
Pump Wall Bracket Mounting Diagram Heater Wall Bracket Mounting Diagram
9 in.
(228 mm)
maximum
3.37 in.
(85.5 mm)
2
3
Slots must face up..
3
Mount the bracket so the top edge is 4 to 5 ft (1.2 to 1.5 m) above the floor.