User's Manual

308771 5
Installation
8. Using two people, lift the heater (1) onto the brack-
et (5) so the two screw heads (E) slide into the
slots. Have one person hold the heater in place
while the other installs the remaining two screws
(supplied with the heater) through the bracket and
into the bottom mounting posts. Tighten all four
screws.
9. Connect the free end of the heater supply hose (2)
to the swivel (A) at the pump fluid outlet. Tighten
securely.
10. Screw the fluid filter (C) assembly onto the bushing
(4) at the heater outlet.
7782C
7781B
Fig. 1
1
Remove and discard.
Disassembly
Detail
A
B
C
D
E
5
A
2
1
C
3
4
1
2
3
2
3
4
Connect a 1 to 3 ft (0.3 to 0.9 m) hose here.
4
F
1
Refer to text and Mounting Hole Layout on page 11 for
correct positioning.
Install top two screws until they are about 1/8 in. (3 mm)
from fully installed.
6
7