Instructions – Parts List STAINLESS STEEL, ONE QUART (ONE LITER) Air Regulated Pressure Cups 308791E Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 10 for model numbers and maximum working pressures. 7611A Single Air Regulator Pressure Cup Kit Part No. 239802 and 245181 Double Air Regulator Pressure Cup Kit Part No. 239803 7613A Remote Single Air Regulator Pressure Cup Kit Part No.
Table of Contents Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts One Quart Pressure Cup 239801 . . . . . . . . . . . . . Single Air Reg Pressure Cup Kit 239802, 245181 . . . . . . . . . . . . Single Air Reg. Assembly 235375, 245192 . . . . . Double Air Reg. Pressure Cup Kit 239803 . . . . . .
Setup 1 Push tube (3) fully into elbow fitting (D) 2 Tapered side of the check valve must face towards the cup’s elbow fitting E E D D F F 1 3 2 13 1 3 2 13 7611A 7612A Part No. 239802 and 245181 Part No. 239803 Single Air Regulator Pressure Cup Kit Double Air Regulator Pressure Cup Kit Fig. 2 Part No.
Operation WARNING Never exceed 20 psi (1.4 bar) static air pressure to the cup. Exceeding the maximum working pressure of the cup or any other system component could cause component rupture, which could result in serious injury and property damage.
Operation Optional Gun Air Regulator 235119 NOTE: D Installing the gun air inlet regulator adds a pressure drop that could limit the air cap pressure. D See Accessories on page 11 for air regulator replacement parts. 1. Pull up the gun regulator adjustment knob lock-ring (L); this allows the knob to turn. See Fig. 5. 2. Set the gun air pressure at zero by turning the regulator adjustment knob (K) fully counterclockwise. 3. Turn on the air supply to the gun. L 4.
Maintenance Disconnect the Gun and Air Regulator from the Cup 5. If any fluid is in the lid elbow fitting (N), flush it with solvent but do not soak it in solvent for an extended period. 1. Follow the Pressure Relief Procedure Warning on page 4. 2. To disengage the tube grip, push down on the outer ring of the lid elbow fitting (N), then pull the tubing (3) out of the fitting. See Fig. 6. 6. If fluid is in the tubing (3) or check valve (13), replace them.
Parts Use Only Genuine Graco Parts and Accessories Single Air Regulator Assembly Part No. 235375, Series B Part No. 245192 One Quart Pressure Cup Part No. 239801 Includes the following parts: Includes the following parts: Ref. No. Part No. Description 101 236908 LID, pressure cup; Includes item 102 GASKET CUP, 1 quart (1 liter) 102 103 189883 239727 Qty. 1 1 1 NOTE: See the Technical Data, page 10, for a list of pressure cup materials. Ref. No. Part No.
Parts Use Only Genuine Graco Parts and Accessories Double Air Regulator Pressure Cup Kit Part No. 239803 Includes the following parts: Part No. Description 235376 Double Air Regulator Assembly See parts list below Pressure Cup Assembly See parts list, page 7 Air Inlet Fitting 239801 195065 Qty. 1 1 1 Double Air Regulator Assembly Part No. 235376, Series B Includes the following parts: Ref. No. Part No.
Parts Use Only Genuine Graco Parts and Accessories Remote Single Air Regulator Pressure Cup Kit Part No. 239804 Includes the following parts: Part No. Description 236142 Remote Air Regulator Assembly See parts list below Pressure Cup Assembly See parts list, page 7 239801 Qty. 1 1 Remote Air Regulator Assembly Part No. 236142, Series B Includes the following parts: Ref. No. Part No. Description 1 2 172620 100188 HOOK HEX NUT 1 Qty. 1 1 Ref. No. Part No.
Technical Data Single Air Regulator Pressure Cup Kit, Part No. 239802 and 245181 Maximum Outlet Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 psi (0.8 bar) Maximum Inlet Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar) Double Air Regulator Pressure Cup Kit, Part No. 239803 Cup Regulator Maximum Outlet Pressure . . . . . . .
Accessories Spray Gun Air Regulator Assembly 235119 Quick Disconnect Coupler 208536 100 psi (7 bar) Maximum Outlet Pressure 150 psi (10 bar) Maximum Inlet Pressure 1/4 npt(f), zinc-plated brass For use on a spray gun with a 1/4–18 npsm air fitting. Includes the following parts: NOTE: Installing the coupler adds a pressure drop that could limit the air cap pressure. Ref. No. Part No.
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
