User's Manual

Instructions – Parts List

GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441

Pro-Shot Grease

Dispense Valve Service Kit

Part No. 243446

Used on Models 242055, 242056, 242057, and 242058

309119D

TI0629B

Ref.

No. Description Qty.

1 NUT, self-locking; 10–32 2

2 BALL, carbide 1

3 SPRING, compression 1

4 SEAL 1

5 NUT, hex; 10–32 2

6 GASKET; copper 2

Ref.

No. Description Qty.

7 PLUNGER/ROD ASSY. 1

8 SEAT, valve 1

9 YOKE 1

10 SHAFT, pivot 2

11 GUIDE, rod 1

PAGE 1
Instructions – Parts List Pro-Shot Grease Dispense Valve Service Kit 309119D Part No. 243446 Used on Models 242055, 242056, 242057, and 242058 10 1 11 4 6 5 2 9 8 7 6 3 TI0629B Ref. No. Description 1 2 3 4 5 6 NUT, self-locking; 10–32 BALL, carbide SPRING, compression SEAL NUT, hex; 10–32 GASKET; copper Qty. 2 1 1 1 2 2 GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441 Copyright 2000, Graco Inc. is registered to I.S. EN ISO 9001 Ref. No. Description 7 8 9 10 11 PLUNGER/ROD ASSY.
PAGE 2
Installation See instruction manual 309032 for troubleshooting guide. Replace all parts included in this service kit, checking all parts thoroughly when disassembling, and carefully replace any additional parts that are worn or damaged. Adjustment 2. To adjust the clearance, loosen the top nut (Fig. 1, item 5) and turn the bottom nut (5) in or out as needed. Hold the bottom nut in place and securely tighten the top nut.