User's Manual

Installation
310652K 3
Installation
The CleanLine Filter
™
is installed upstream from the dispense equipment. It can be pump or wall-mounted.
Wall Mount Clean Line 900 Installation Wall Mount Clean Line 1800 Installation
FIG. 1
KEY DESCRIPTION, See F
IG. 2.
E Fluid shut-off valves (two)
F Air Regulator
G CleanLine Filter System
HPump * †
J Filter and Lubricator Assembly
K Master Bleed Air Valve (ball valve)
* Do not use diaphragm pumps in a Matrix system.
† Special pump packages are required for anti-
freeze. See instruction manual 310650.
E
H
F
G
J
K
ti10680a
FIG. 2
KEY DESCRIPTION, See F
IG. 2.
D
Thermal Pressure Relief Kit must be
installed downstream from the pump. The
Thermal Pressure Relief Kit will vary based
on the pump selected. See manual 308403.
E Fluid shut-off valves (two)
F Air Regulator
G CleanLine Filter System
H Pump * †
J Filter and Lubricator Assembly
K Master Bleed Air Valve (ball valve)
* Do not use diaphragm pumps in a Matrix system.
† Special pump packages are required for anti-
freeze. See instruction manual 310650.
D
E
F
G
H
J
K
ti5127