User's Manual

ManualsBrandsGraco ManualsContractor EquipmentGraco 310791A RACX Solvent Seals

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

310791 Rev. A

Instructions

RACX Solvent Seals

Model 248936

4050 psi (280 bar) Maximum Working Pressure

• Use when spraying fluids containing corrosive solvents

• Use with RACX series SwitchTips only.

• Graco RACX SwitchTip sold separately

WARNING

To reduce the risk of fluid injection or splashing in the eyes or on the skin, relieve air and fluid pressure in the system before

installing, cleaning or changing tips. See Pressure Relief Procedure in gun or sprayer manual.

• Keep clear of spray tip. High-pressure spray or leaks can inject fluid into the body, resulting in serious injury which ma

require ampu

tation. Never spray without a tip guard (D).

• Do not exceed 4050 psi (280 bar, 28 MPa) maximum working pressure.

Failure to install or use the RAC

™

tip guard assembly correctly may result in an undirected spray of fluid into the eyes or on the

skin of the operator. Be sure you:

• Fully insert SwitchTip (A) into tip bore (C) in guard

• Do not trigger gun with SwitchTip handle between Spray and Clear positions

• Replace OneSeal when replacing worn SwitchTip

Installing Disassembling

Clearing a Clogged Tip

Note:

If SwitchTip is still clogged, follow Pressure Relief Procedure in gun or sprayer manual, and remove SwitchTip for cleaning.

Use end of pencil (A) to press OneSeal

(B) into tip guard (D), with curve matching

tip bore (C)

ti2508b

Insert SwitchTip in tip bore and firmly

thread assembly onto gun

Use SwitchTip handle to remove OneSeal

from tip guard

Engage gun safety and rotate

SwitchTip handle to Clear

position

Disengage gun safety and

trigger gun into pail to clear

SwitchTip

Engage gun safety and rotate

SwitchTip handle to Spray

position

Disengage gun safety and

trigger gun into pail to verify

SwitchTip is clear

Summary of content (2 pages)

PAGE 1
Instructions RACX Solvent Seals 310791 Rev. A Model 248936 4050 psi (280 bar) Maximum Working Pressure • Use when spraying fluids containing corrosive solvents • Use with RACX series SwitchTips only. • Graco RACX SwitchTip sold separately WARNING To reduce the risk of fluid injection or splashing in the eyes or on the skin, relieve air and fluid pressure in the system before installing, cleaning or changing tips. See Pressure Relief Procedure in gun or sprayer manual. • • Keep clear of spray tip.
PAGE 2
TO PLACE AN ORDER, contact your Graco distributor, or call 1-800-690-2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Sales Offices: Minneapolis International Offices: Belgium, Korea, Hong Kong, Japan GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441 http://www.graco.com PRINTED IN U.S.A. 310791, Rev.