User's Manual

Models
311828H 3
Models
Dura-Flo Pumps with NXT
™
Air Motors Part No. Matrix
Check your pump’s identification plate (ID) for the 6-digit part number of your
pump. Use the following matrix to define the construction of your pump, based
on the six digits. For example, Pump Part No. P16MSE represents the
pump (P), pressure ratio (16:1), low noise exhaust motor with DataTrak
™
(M),
stainless steel construction (S), and 4 leather/1 ptfe packing configuration (E).
To order replacement parts, see Parts section starting on page 20. The digits
in the matrix do not correspond to the Ref. Nos. in the Parts drawings and lists.
Dura-Flo Pumps with NXT
™
Air Motors Part Nos.
ID
P16 M S E
First
Digit
Second and Third
Digit Fourth Digit Fifth Digit Sixth Digit
Pressure Ratio (xx:1) Exhaust Communication Material Packings
P
(pumps)
16
C Low Noise Remote DataTrak S Stainless
Steel
E 4 leather/1 ptfe
21
D De-icing none H ptfe/leather
24
E De-icing DataTrak S
Severe Duty
®
25
L Low Noise none
30
M Low Noise DataTrak
31
H Low Noise High Level Sensor
40
45
46
57
Pump Part
No., Series
Lower
Part No. Lower Model, Packings
Air
Motor
Part No. Ratio
Maximum
Working Pressure
MPa, bar (psi)
Maximum Air
Input Pressure
MPa, bar (psi)
P16DSE, A 247192 Dura-Flo 1200 (290 cc),
4 leather/1 PTFE
N22DN0 16:1 10.5, 105 (1520) 0.7, 7.0 (100)
P16ESE, A 247192 Dura-Flo 1200 (290 cc),
4 leather/1 PTFE
N22DT0 16:1 10.5, 105 (1520) 0.7, 7.0 (100)
P16LSE, A 247192 Dura-Flo 1200 (290 cc),
4 leather/1 PTFE
N22LN0 16:1 10.5, 105 (1520) 0.7, 7.0 (100)
P16MSE, A 247192 Dura-Flo 1200 (290 cc),
4 leather/1 PTFE
N22LT0 16:1 10.5, 105 (1520) 0.7, 7.0 (100)