User's Manual

Maintenance Procedures

20 313527V

Remove 30 and 55 Gallon Platen Wipers

1. To replace worn or damaged wipers (EB), raise

platen up out of drum. Remove drum from base.

Wipe fluid off of platen.

2. Cut top and bottom wipers with knife and remove

from platen. See F

. 15.

Reinstall 30 and 55 Gallon Platen Wipers

1. Using a wooden or plastic tool to prevent damage to

the wiper (EB), clean all material from seal grooves.

2. Working from the bottom, angle one wiper (EB) over

back of platen. See F

. 16.

3. Insert wiper (EB) in top groove and run front of wiper

into groove.

4. 55 gallon wiper only: Insert second wiper (EB) in

lower groove and run front of wiper into groove.

5. Lubricate outside of wiper with lubricant compatible

with material being pumped. Check with material

supplier.

. 15

. 16

TI10613A

TI10614A