User's Manual

SmartDie
™
Screed Box
14 313787C
3. Set SmartDie
™
screed box on ground but not in
locked open position.
4. Remove hairpin cotter pin connecting SmartDie
™
screed box to rod clevis.
5. Press down SmartDie
™
lever.
6. Disengage SmartDie
™
screed box rod from Smart-
Die
™
lever and carefully remove SmartDie
™
.
Adjustment
The height and angle of the SmartDie
™
screed box can
be adjusted to ensure a solid line of material on any sur-
face. For optimum delivery of thermoplastic material,
make sure the SmartDie
™
screed box die runner is par-
allel to road surface.
1. Loosen two bolts on SmartDie
™
screed box mount-
ing bracket.
2. Slide mount down until leading box edge of Smart-
Die
™
screed box die runner is just off of the ground
surface. For best performance, raise leading edge
0 - 0.03 in. (0 - 0.076 cm) off ground surface.
3. Tighten bolts on screed box mounting bracket.
ti14267a
ti14155a
ti14270a
ti14414a
SmartDie
™
Screed Box Die Runner
SmartDie
™
Screed Box Gate
SmartDie
™
Screed Box Trough
ti14504a
ti14505a
ti14545a
0 - 0.030 in.
SmartDie
™
Screed Box Gate
SmartDie
™
Screed Box Trough
SmartDie
™
Screed Box Die Runner
ti14506a