User's Manual

Technical Data
36 313869K
Technical Data
Maximum working fluid pressure 100 psi (0.7 MPa, 7 bar)
Maximum working air pressure 100 psi (0.7 MPa, 7 bar)
Maximum HVLP Inbound Air Pressure See chart on page 11.
Maximum Working Fluid Temperature 120° F (49° C)
Minimum Air Cylinder Actuation Pressure 50 psi (0.34 MPa, 3.4 bar)
Weight
with manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
with no manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 lb (575 g)
0.6 lb (275 g)
Wetted Parts
Models 24B857-24B860, 24B862-24B865,
24B869-24B873, 24B875, 24P993, 24P994. . . . . . . .
Nylon, PTFE, Stainless Steel, Ultra
High Molecular Weight Polyethylene,
Perfluoroelastomer
Model 24B866. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PTFE, Stainless Steel, Ultra High
Molecular Weight Polyethylene,
Perfluoroelastomer
Models 24B867 and 24B868. . . . . . . . . . . . . . . . . . . . PTFE, Stainless Steel, Ultra High
Molecular Weight Polyethylene,
Tungsten Carbide, Perfluoroelastomer
Models 24B861, 24B874, 24M390, and 24M391 . . . . Nylon, PTFE, Stainless Steel, Ultra
High Molecular Weight Polyethylene,
Tungsten Carbide, Perfluoroelastomer
Models 24B877-24B883, 24B887-24B892, 24P995,
24P996 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anodized Aluminum, Nylon, Stainless
Steel, Ultra High Molecular Weight
Polyethylene, Perfluoroelastomer
Models 24B885 and 24B886. . . . . . . . . . . . . . . . . . . . Anodized Aluminum, Stainless Steel,
Tungsten Carbide, Ultra High Molecu-
lar Weight Polyethylene,
Perfluoroelastomer
Model 24B884. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anodized Aluminum, Stainless Steel,
Ultra High Molecular Weight
Polyethylene, Perfluoroelastomer
Models 24M392 and 24M393 . . . . . . . . . . . . . . . . . . . Nylon, Anodized Aluminum, Tungsten
Carbide, Ultra High Molecular Weight
Polyethylene, Perfluoroelastomer