User's Manual

General Information

313881B 13

General Information

• Reference numbers and letters in parentheses in

the text refer to numbers and letters in the illustra-

tions.

•F

. 2, page 8, shows the basic components of a

ProMix 3KS system. Contact your Graco distributor

for actual system designs.

• Be sure all accessories are adequately sized and

pressure-rated to meet system requirements.

• There must be a shutoff valve between the compo-

nent C fluid supply line and the ProMix system.

• A 100 mesh minimum fluid filter must be installed on

the component C fluid supply line.

Wall Mounting

1. See Dimensions and Mounting Hole Layouts,

page 40.

2. Ensure that the wall and mounting hardware are

strong enough to support the weight of the equip-

ment, fluid, hoses, and stress caused during opera-

tion.

3. Using the equipment as a template, mark the

mounting holes on the wall at a convenient height

for the operator and so equipment is easily accessi-

ble for maintenance.

4. Drill mounting holes in the wall. Install anchors as

needed.

5. Bolt equipment securely.