User's Manual

Run Mode Screens
313882C 23
Totals Screen
This screen shows the job totals, grand totals, and job
number. Use the tabs to reset job totals (Job Complete),
reset solvent totals (Rst Solvent), or go to Level Control
Screen, page 24.
Solvent Totals and the Rst Solvent tab only appear if
“Meter” is selected under Solvent Monitor in Configure
Screen 5 on page 31.
NOTE: Grand totals are not resettable.
Reset Total Screen
If job is reset, job number will increment by one for
default.
Reset Solvent Screen
The screen will ask if you want to reset solvent total.
Select Yes or No.
Alarms Screens
Two screens show the last 10 alarms. Use the Up or
Down keys to scroll between the two screens.
See Table 9 on page 77 for a list of alarm codes.
F
IG. 11. Totals Screen
F
IG. 12. Reset Total Screen
FIG. 13. Reset Solvent Total Screen
F
IG. 14. Alarms Screen