User's Manual

Setup Mode

26 313882C

Password Screen

If a password has been activated (see Configure

Screen 1, page 29), the Password screen will appear.

You must enter the password to access the Set Up

Home Screen. Entering the wrong password returns the

display to the Status Screen.

NOTE: If you forget the password, you can reset the

password (to 0), using the ProMix Web Interface (see

manual 313386).

NOTE: If a password is activated, Setup Locked dis-

plays momentarily after exiting Setup mode and return-

ing to the Status Screen. A lock symbol appears

on the Status Screen.

Set Up Home Screen

This screen displays when you enter Setup mode. From

it you can go to Recipe and Advanced Setup Screens

(pages 34-41) or System Configuration Screens

(pages 28-31). Press the Enter key to go to the

selected screen set.

The screen also displays software versions and internet

addresses of various components. The values shown in

IG. 20 are only examples and may vary on your screen.

See Table 4 for further information.

IG. 18. Password Screen

IG. 19. Setup Locked Screen

FIG. 20. Set Up Home Screen