User's Manual

Setup Mode

30 313882C

Configure Screen 3

Run Mode

Indicates that this is a Manual system.

Dump Valve A

This field only appears if the system includes an optional

dump valve A. If dump valve A is included, set to On.

Dump Valve B

This field only appears if the catalyst change option is

detected from the cc board, meaning that dump valve B

is present. On is the only setting.

Dump Valve C

This field only appears if the component C change

option is detected from the cc board, meaning that dump

valve C is present. On is the only setting.

3rd Flush Valve

Off is default. If optional 3rd flush valve is used, set to

On.

Configure Screen 4

Dose Size

Select the total dose size (cc) from the pulldown menu:

100, 50, 25, or 10.

NOTE: Selection DD is for dynamic dosing, which is not

used with ProMix 3KS.

Example:

To calculate the dose size of each component, you must

first calculate the A+B:C dose sizes. For example, if the

total dose size is 50 cc and the A+B:C ratio is 1:1, the

dose size of A+B is 25 cc and the dose size of C is also

25 cc. Then use the ratio of A:B (2:1 in this example) to

calculate the dose size of A as 16.67 cc (2/3 of 25) and

the dose size of B as 8.33 cc (1/3 of 25).

Dose Time Alarm

Enter the dose time (1 to 99 seconds). This is the

amount of time allowed for a dose to occur before a

dose time alarm occurs.

Number of Guns

Enter the number of spray guns (1 or 2).

Gun Flush Box

Enter the number of gun flush boxes (Off, 1, or 2).

IG. 24. Configure Screen 3

IG. 25. Configure Screen 4

FIG. 26. Dose Size Menu