User's Manual

Setup Mode
313885C 31
Configure Screen 5
Flow Control
This field only appears if Run Mode is set to “Automatic”
in Configure Screen 3, page 30. Select On or Off.
If set to “On,” Advanced Setup Screen 5, page 37 is
added.
Special Outputs
Select special outputs (0-4). Each output has two differ-
ent start times and durations.
Solvent Monitor
Select solvent monitor (Off, Flow Switch, or Meter).
Web Browser IP
The default web browser IP address prefix is
192.168.178.__ Assign a unique number for each
EasyKey in your system (1-99) and enter it here.
Configure Screen 6
Flow Control
This field only appears if Run Mode is set to “Automatic”
in Configure Screen 3, page 30. Select “Discrete” or
“Network.”
Proportioning
Select “Discrete” or “Network.”
Gun 1 Trigger
Displays AFS if Run Mode is set to “Semi-automatic” in
Configure Screen 3, page 30.
Select “Discrete” or “Network” if Run Mode is set to
“Automatic” in Configure Screen 3, page 30.
Gun 2 Trigger
Displays AFS if Number of Guns is set to “2” in Config-
ure Screen 4, page 30.
Control Network ID
Used for the Graco Gateway network system. See
Graco Gateway manual 312785 for further information.
F
IG. 30. Configure Screen 5 FIG. 31. Configure Screen 6 (Automatic mode shown)