User's Manual

Troubleshooting

332144C 29

DIP Switch Settings

1. Turn power off and unplug power cords from wall

outlets.

2. Remove screws and display cover (26).

3. Locate the DIP switch on the control board.

4. Set DIP switches to the desired positions. See DIP

Switch Settings and Functions, page 30

5. Replace display cover (26) and plug in unit.

6. Cycle power switch to activate changes to DIP

switch.

To avoid electric shock, always unplug both power

cords before servicing Reactor and wait one minute.

. 6: DIP Switch

ti21923a