User's Manual

Parts
332144C 65
24T954, 120 V and 230 V Bare Proportioner
215
210
201
220
207
ti21847a
9
216
212
(steel)
213
(bronze)
208
(steel)
211
(bronze)
209
(bronze)
219
213
(bronze)
214
207
233
217
218
222
207
Apply lubricant to all gear teeth, motor pinion, and motor
endbell on both sides of motor.
Apply lubricant to rectangular cavity on connecting link.
Apply lubricant to threads of pump cylinder before assembly
into housing. Align top of cylinder flush within 0.06 to inside
bottom of pump mounting hole.
Torque fasteners to 140-160 in.-lbs (15-18 N•m).
Assemble nut to finger tight only.
Torque fasteners to 30-35 in.-lbs. Applies only when fasteners
are assembled in plastic housings (215).
Switch mounts to cover opposite brush end of motor only.
Housing must be installed on motor with crankshafts aligned
with each other.
Assemble magnet to center of offset crankshaft on switch
cover side of motor and adjust for park location.
Affix switch to motor cover with double-sided tape. Cut to 2 in.
(50.8 mm). Mount cover on side opposite brush end of motor.
1
2
3
4
5
6
7
8
9
10
229
81
83
207
221
6
6
4
223
7 10
6
2
5
3
TI7028a
223
0.6 in. (15.2 mm)
from inside edge
1.0 in. (25.4 mm)
from inside bottom
edge
91
(ref)
89
(ref)