G15/G40 Manual Air-Assist spray guns designed for exceptional spray quality and ease of use.
Exceptional Spray Quality Maximize efficiency and quality, while reducing operator fatigue! G15/G40 air-assist guns use the highest quality components for long lasting reliable performance. Most importantly, the G15/G40 guns deliver superior spray performance while improving transfer efficiency and reducing material usage.
Reliable Performance Spray Quality Achieve a Superior Finish • Enhanced tip design creates uniform atomization for a superior finish quality • Unique aircap enables soft spray • Lower fluid and air pressure design allows for increased transfer effciency • Adjustable fan pattern means less overspray, less material waste, less VOC’s, and improved productivity Merkur Air-Assist Packages High Performance Finishing Quality pumps enhance any finishing system.
Designed with the User in Mind Quick, Accurate Positioning! The G15 indexing aircap provides fast and accurate positioning in either the vertical or horizontal position. 2 6 3 4 5 Reduce Overspray and Increase Productivity! 3/4 turn fan pattern adjustment allows the operator to change the spray width according to the size of parts. G15/G40 Air-Assist Gun 1. High strength hook 2. Aircap retain feature 3. Indexing aircap (G15 only) 4. Optimal spray pattern tips 5. Soft spray aircap A 6.
1 9 Increase Spray Performance! Enhanced tip design provides uniform atomization and improved finish quality 10 11 Three tip lines to meet the needs of different applications AAF Tips - Fine finish tips with a pre-orfice for soft spray and increased transfer efficiency 7 AAM Tips - Fine finish tips for a high quality finish at low and medium pressures GG4 Tips - High wear tips for industrial finishes at high pressures 12 8 All tips have a ring to retain the tip in the aircap.
Ordering Information Air-Assist Gun Models • G15 carbide model is recommended for low to medium viscosity materials • G15 acetal seat model is recommended for acid-catalyzed materials • G40 models are recommended for high viscosity materials above 1500 psi 24C853 G15 Air-Assist Carbide Gun Medium pressure gun includes carbide seat/ball, indexing aircap and choice of AAM or AAF spray tip from chart, which is specified when order is placed.
Spray Tip Selection Chart AAM and GG4 Spray Tip Selection Chart • AAM Tips: Fine Finish Tips recommended for high finish quality applications at low and medium pressures. • GG4 Tips: High Wear Industrial Tips recommended for high pressure applications. Do not use tips marked with ‡ for Model G15 guns (24C853 or 24C854). All tips in the Spray Tip Selection Chart can be used with Model G40 guns. Use tips marked with ‡ for Model G40 guns only. Order desired tip (part no. AAMxxx or GG4xxx) from matrix below.
ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service.
