User's Manual

Heavy-Duty In-Drum

Back-Geared Agitator

Reliable, Leak-Free Operation

Quick connect heavy-duty back-geared agitator for drums or tanks with

pre-installed blades

• ATEX approval for hazardous locations

• Oil free gear box elimates material contamination

• Interchangeable adapters and couplers to fit a variety of drum designs

• Simple screw in installation

• Corrosion resistant stainless steel construction

• Available in either 1.5 inch or 2 inch bung sizes, with shaft adapters

Leak-free

Design

PAGE 1
Heavy-Duty In-Drum Back-Geared Agitator Reliable, Leak-Free Operation Leak-free Design Quick connect heavy-duty back-geared agitator for drums or tanks with pre-installed blades • ATEX approval for hazardous locations • Oil free gear box elimates material contamination • Interchangeable adapters and couplers to fit a variety of drum designs • Simple screw in installation • Corrosion resistant stainless steel construction • Available in either 1.
PAGE 2
Technical Specifications Maximum air input pressure................................................ 100 psi (7 bar) Motor power rating at 1200 rpm (shaft at 50 rpm), Using 12 cfm (0.34 m3/min).....................................0.25 hp (186 W) Maximum recommended shaft rpm...................................................... 100 Gear reducer ratio............................................................................. 24:1 Weight .....................................................................