User's Manual

Shutdown
3A0232R 23
10. Wipe the trigger clamp assembly, actuator pins, and
surface between the trigger clamp and the gun body
with a rag to remove material. Use a compatible sol-
vent.
Long-Term Shutdown
If gun will be unused for at least one week, perform this
long-term shutdown procedure.
1. Perform Daily Shutdown procedure, beginning on
page 21.
2. Flush System, see page 24.
NOTICE
Failure to clean the surface between the trigger clamp
and the gun body can lead to material buildup prevent-
ing the clamp from seating properly resulting in mate-
rial leakage from the front of the gun.
ti17902a