User's Manual

Operation
64 3A0294G
Select a Shot Number
Shots are defined in setup screen 2. See Define Shot
Size, page 54, for instructions.
1. Change operation mode to shot, if necessary. See
Change Operation Mode, page 62, for instructions.
2. Press to navigate to the shot number
field .
3. Press to enter the shot number field.
4. Press to increment or decrement to the
desired shot number.
5. Press to select the desired shot number.
6. Dispense the shot. See Dispense a Shot, page 65.
The actual volume dispensed will display under the
desired dispense volume.
7. Follow steps 2 through 6 to select and dispense
another shot.
8. When you are finished selecting and dispensing
shots press to exit edit mode.
Select a Shot Sequence
Sequences are defined in setup screen 3. See Define
Shot Sequence, page 55, for instructions.
1. Change operation mode to sequence, if necessary.
See Change Operation Mode, page 62, for instruc-
tions.
2. Press to navigate to the current mode
field, which should be set to shot
sequence .
3. Press to enter the field.
4. Press to scroll through the available
shot sequences.
NOTE: All defined sequences (A-E) can be selected
from the run screen. Any sequences that are not defined
can not be selected from the run screen. Sequences are
defined in Setup Mode; see Define Shot Sequence on
page 55.
5. Press to select the desired shot sequence.