User's Manual

ManualsBrandsGraco ManualsAutomatic Lubrication SystemsGraco 3A0533D G3 Pump Element Replacement Kit

Instructions

G3 Pump Element

Replacement Kit

Instructions for adding/replacing a Pump Element used in G3 pump. For professional use

only.

Part No.: 571041

Kit Parts 571041

Important Safety Instructions

Read all warnings and instructions in this

manual and the G3 Pump instruction manual

included with your unit. Save these instructions.

Ref. Description Qty

1 PUMP, element 1

2 SPACER, stroke adjust 2

3 LABEL, safety (not shown) 1

4O-RING 1

3A0533D

ENG

Summary of content (4 pages)

PAGE 1
Instructions G3 Pump Element Replacement Kit 3A0533D ENG Instructions for adding/replacing a Pump Element used in G3 pump. For professional use only. Part No.: 571041 Important Safety Instructions Read all warnings and instructions in this manual and the G3 Pump instruction manual included with your unit. Save these instructions. 4 2 3 4 1 1 Kit Parts 571041 Ref.
PAGE 2
Instructions Instructions Pressure Relief SKIN INJECTION HAZARD High-pressure fluid from dispense device, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment. Follow Pressure Relief Procedure in this manual, when you stop dispensing and before cleaning, checking, or servicing equipment.
PAGE 3
Instructions 4. Tighten pump element buy hand and then torque to 50 in. lbs (5.6 N•m) (FIG. 3). 1. Use a wrench to turn pump element counter-clockwise to loosen. 2. If needed, remove or insert spacers to achieve required pump output volume. • Pump volume control is set using either no (0) spacers, 1 or 2 spacers (FIG. 4). • Do not use more than 2 spacers on any pump element. Table 1: Output Volume Output Volume / Minute FIG. 3 Adjusting Output Volume No. Spacers cubic inches cubic cm 0 0.
PAGE 4
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 3A0533 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441 Copyright 2010, Graco Inc. is registered to ISO 9001 www.graco.