User's Manual

Display Module
3A0868G 23
Screen Summary
NOTE: This summary is a one-page guide to the ProMix 2KE screens, followed by screen maps. For operating
instructions, see Basic Operation, page 29. For further detail on individual screens, see Run Mode Details, page
39, or Setup Mode Details, page 42.
Run Mode
The run mode has three screen sections that control the
mixing operations.
Mix (Screens 2-4, 38)
• Spray (Screen 2) controls most mixing opera-
tions.
• Batch (Screen 3) controls dispense of a set vol-
ume.
• Totals (Screen 4) displays grand and batch
totals for materials A and B.
• Job Number (Screen 38) displays job number
and user number
Error Log (Screens 5-14)
• 10 screens, 5 errors per page.
• Displays date, time, and error.
Pump Control (Screen 15)
• Manually start or stop a pump.
• Park pumps for brief shutdowns.
Setup Mode
The setup mode has four screen sections that allow an
authorized user to choose the exact settings needed for
the system:
Configure (Screens 18-21)
• Configure 1 (Screen 18) controls system type
(pump or meter), gun flush box enable, and
number of guns (1 or 2).
• Configure 2 (Screen 19) controls hose length
and diameter for one or two guns, flow rate
region setting, and air flow switch enable or
disable.
• Configure 3 (Screen 20) controls language (for
optional USB Module), date format, date, time,
password setting, and backlight timer.
• Configure 4 (Screen 21) controls units for dis-
tance, volume and pressure.
Recipe (Screens 28 and 29)
• Recipe 1-1 (Screen 28) and 1-2 (Screen 29)
control Material 1/Color 1 parameters and flush.
Maintenance (Screens 24-26)
• Maintenance 1 (Screen 24) controls mainte-
nance timer actual and target for Pump A,
Pump B, Solvent Valve A, and Solvent Valve B.
• Maintenance 2 (Screen 25) controls dose
valves A and B maintenance timers, actual and
target.
• Maintenance 3 (Screen 26) controls fluid and air
filter maintenance timers, actual and target.
Calibration (Screens 22 and 23)
• Calibration 1 (Screen 22) controls pump factors
for Pump A and Pump B.
• Calibration 2 (Screen 23) allows the user to per-
form a calibration.
Troubleshooting
The troubleshooting mode has three screen sections
that allow an authorized user to troubleshoot system
operation. See F
IG . 14, page 28.
System Inputs (Screen 35)
Membrane Test (Screen 36)
System Outputs and Manual Activation (Screen 37)