User's Manual

Instructions

Paint Gun Stencil Kit for Line Striping

System

Model 24G778, Series A

3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure

Important Safety Instructions

For complete warnings and safety instructions see RoadLazer

™

RoadPak

™

Line Striper System manual. Save these instructions.

ti16518a

ti109493c

3A1309B

Pressure Relief Procedure

The system pressure must be manually relieved to pre-

vent the system from starting or spraying accidentally.

Fluid under high pressure can be injected through the

skin and cause serious injury. To reduce the risk of an

injury from injection, splashing fluid, or moving parts,

follow the Pressure Relief Procedure in manual

3A1214 whenever you:

• are instructed to relieve the pressure

• stop spraying

• check or service any of the system equipment

• install or clean the spray tip

Works in conjuction with hand bead gun kit

P/N 238957

PAGE 1
Instructions Paint Gun Stencil Kit for Line Striping System 3A1309B EN Model 24G778, Series A 3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure Important Safety Instructions For complete warnings and safety instructions see RoadLazer™ RoadPak™ Line Striper System manual. Save these instructions. Pressure Relief Procedure The system pressure must be manually relieved to prevent the system from starting or spraying accidentally.
PAGE 2
RoadPak Gun Stencil Kit Installation 1. Perform Pressure Relief Procedure before installing (see manual 3A1214). 1 4 3 2 5 ti16519a 6 7 8 Parts List Ref. 1 2 3 4 5 6 7 8 11 12 13 14 15 16 Part 248157 249080 166969 180137 223718 180136 243161 286425 101566 108851 16G776 516595 196177 124490 Description FLEX GUN HOSE, coupled 1/4 x 50 ft GASKET NUT, gun TUBE, extension, 15.83 in. ADAPTER, tip GUARD, RAC 5 SWITCH TIP, size 425 NUT, lock WASHER, plain BRACKET, hose wrap BOLT, hex, 3/4 in.