User's Manual

Installation
4 3A1704G
4. If used, connect the ethernet, DeviceNet, or PROFI-
BUS cable to the CGM as applicable. Connect the
other end of the cable to the FieldBus device.
5. Connect cable (LC0032) to the MCM, port 2B, and a
customer provided signal device. The signal device
must have isolated, dry contacts.
6. Perform the Install or Update Data Map procedure in
CGM manual 312864.
7. See Available Internal Data on page 9 for details
on FieldBus pinout setup.
8. Perform Setup on page 5 to configure the fieldbus.
F
IG. 3: Cable Connections
ti11985a