User's Manual

Setup
3A1704G 5
Setup
Gateway Screens
The Gateway screens are used to configure the fieldbus.
These screens are shown only if a CGM is correctly
installed in your system. See Installation on page 3.
1. With the system on and enabled, press to
access the Setup screens.
2. Press the left arrow key once to navigate to the main
Gateway screen. See F
IG. 4.
PROFIBUS Fieldbus Screens
These screens are shown only if you have a PROFIBUS
Fieldbus CGM installed. See Kits on page 2.
Screen 1
This screen enables the user to set the device address,
install date, location tag, function tag, and description.
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
Fieldbus Screens Page
PROFIBUS 5
PROFINET 6
DeviceNet 7
EtherNet/IP 7
F
IG. 4: Example Fieldbus Screen
FIG. 5: PROFIBUS Fieldbus Screen 1
F
IG. 6: PROFIBUS Fieldbus Screen 2