Installation LPA2 Adapter Kit For installing an RS™ gun onto an LPA2 system. Part No. 125843 Important Safety Instructions Read all warnings and instructions in the RS gun manual 3A0232. Save all instructions.
Connecting an RS Gun to an LPA2 System Connecting an RS Gun to an LPA2 System C B A D 2 1 3 C 4 Key: A B C D 2 LPA-160-08, Catalyst pump assembly MPB-375, Air manifold 21215-00, Check valve Catalyst pump outlet 3A2079A
Connecting an RS Gun to an LPA2 System Parts Included in Kit 125843 Ref Part Number 1 Description Qty 124803 JIC 04 (male) x 1/8 NPT (male) 1 2 22017-01 1/4 tube (male) x 1/8 npt (female) 1 3 7596-02 3/8 npt (male) x 1/4 npt (female) 1 4 LPA-143 1/4 tube (female) x 1/4 npt (female) 1 Fitting Installation To reduce the risk of skin injection from high pressure fluid, perform Pressure Relief Procedure before connecting fittings. See RS gun manual 3A0232. 1.
Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
