User's Manual

Component Identification

22 3A2175A

Motor Control Module (MCM)

For MCM location, see reference MA in FIG. 4 on

page 19. When installed, the end of the MCM with the

power input connection (12) faces down and the end

with the access cover (A) faces up.

The Motor Control Module uses an 8-position selector

switch to set the system maximum working pressure.

NOTICE

If the Motor Control Module is replaced, the selec-

tor switch must be set prior to initial startup of the

Motor Control Module or damage may occur. See

HFR Repair manual for details, see Related Man-

uals on page 3.

FIG. 6: MCM Component Identification

r_257396_3b9905_01b

r_257396_3b9905_03b