User's Manual

Operation

38 3A2175A

Shutdown

1. Park pumps.

a. From the Home screen, press and select

Standby mode.

b. Press . Material will dispense. Pump will

park automatically. Once pump is parked, pump

will stop moving.

If a dispense gun with a trigger is installed,

pulling the trigger will begin a park operation.

Material will dispense.

2. Press the enable/disable key on the ADM to

disable the ADM.

3. Turn main power switch (MP) to OFF position.

4. Close A (Red) and B (Blue) fluid supply valves (FV),

if equipped, or remove fluid pressure at supply

device.

5. Perform Pressure Relief Procedure on page 38.

6. Shut down feed pumps as required. See feed pump

manual.

Pressure Relief Procedure

1. Shut off feed pumps and agitator, if used.

2. Turn PRESSURE RELIEF/DISPENSE valves (SA,

SB) to PRESSURE RELIEF/CIRCULATION .

Route fluid to waste containers or supply tanks.

Ensure gauges drop to 0.

3. For models with an dispense valve with a safety

lock, engage gun safety lock.

4. Relieve pressure in dispense valve. See dispense

valve manual.

ti9883a1

ti9879a1