User's Manual

Appendix A - ADM Icons Overview
56 3A2175A
Appendix A - ADM Icons Overview
Icon Function
Access Learn Mode Calibration screen
Access Weight Calibration and Material
Specific Gravity Entry screen
Pump Graphic
Calibration Screen, Learn Mode:
Move pump
All other screens:
Begin Dispense
Stop Dispense
Press to enter the Conditioning Control
screen
Select left direction
Select right direction
Proceed to next step in calibration pro-
cedure
Back to main calibration screen
Run MCM Learn Mode
Erase Individual Data
Erase All Data
Abort Changing the Label
Backspace
Turn on or off the highlighted zone.
Turn on or off all zones.
Select mode
Move L-Head Cleanout Rod
With a mix head installed: Tur n s on
the mix head hydraulics and puts the
machine in low pressure circulation.
Press a second time to turn off insti-
gated system action.
Edit Operator Dispense Setting
Lock Dispense Valve Closed
(Press to lock the valved closed during
a dispense. Used to circulate through
the material manifold back to the tank
(the Pressure Relief/Dispense Valves
will need to be in the relief position).
Open, Close Valve
A (Red) and B (Blue) refill button
(Press to start/abort refill)
OR
Jump in to select sequence letter and
position.
Skip the next shot in selected
sequence. Only available when the sys-
tem is not dispensing.
Abort sequence and reset to first valid
position
Set system in park (icon will be selected
when system is parked)
Icon Function