User's Manual

Appendix B - ADM Setup Screens Overview
3A2175A 59
Shots Screen
This screen allows the user to edit shot definitions. The
contents of this screen change based on the Dispense
and Control Mode selections. Shots may be defined by
pressure or flow rate depending upon the Control Mode
selection and by time (duration), volume, or weight
depending upon the Dispense Mode selection. See Sys-
tem Screen #1 for Control and Dispense Mode options.
See Home Screen, Shot Mode on page 69 for informa-
tion on how to use predefined shots.
NOTE: 100 shot definition are available across ten
pages.
To edit a shot definition:
1. Press the Enter screen button then use the
arrow keys to navigate to the desired value.
2. Type the new value then press the Enter button
to accept the new value.
Sequences Screen
This screen allows the user to edit sequence informa-
tion. The contents of this screen change based on the
Dispense and Control Mode selections.
Dispense detail is shown as volume, time, or weight
depending on which Dispense Mode is selected. See
System Screen 1 on page 61 for Dispense Mode
options. See Home Screen, Sequence Mode on
page 70 for information on how to use predefined
sequences.
NOTE: 5 sequences with 20 positions each are avail-
able across 10 pages.
To edit a sequence:
1. Press the Enter screen button then use the
arrow keys to navigate to the desired value.
2. Type the new value then press the Enter button
to accept the new value.