User's Manual

Troubleshootin
g
Code
Type Description Problem
Cause Solution
DG0#
Alarm
No Stall
Down
Pump #
Pump stall tes
t failed;
pump did not st
all on
the down strok
e.
Valve failure
,seal
failure, worn
rod or
cylinder.
Replace inlet and
outlet valve and seal
for down stroke.
Replace piston and
throat seals. Replace
rod and cylinder as
necessary.
DH0#
Alarm
No Stall
Pump #
Pump stall test failed;
pump did not stall on
either the up or down
stroke.
Valve failure, seal
failure, worn rod or
cylinder.
Replace inle
t and
outlet valv
e and seal
for up and do
wn
strokes. Re
place
piston and t
hroat
seals. Rep
lace
rod and cyl
inder as
necessary
.
DK0#
Alarm Position
Pump #
Thepumpwas
detected to be out
of position.
Re-enable pump
power to reset pump.
EAUX Advisory
USB Busy USB driv
e has been
inserte
d, download is
in progr
ess.
Indicat
es USB port
is uploa
ding or
downloa
ding data.
Wait for
USB Idle.
EB00 Record
Stop
Button
Pressed
Recordofastopbutton
press.
Indicates system stop
key on ADM was
pressed.
n/a
EBH#
Record Home
Comple
te
Pump #
Record of pump
homing complete.
An indi
cation on the
displa
y that the pump
compl
eted the home
funct
ion
No acti
on required.
EBUX Record
USB
drive was
removed.
USB drive was
removed while
downloading or
uploading.
Downloading/uploading
data on USB was
interrupted by the USB
device being removed.
Replace the USB
device and begin
process again.
EC00
Reco
rd
Setup
Value(s)
Changed
Record of changing
setup variables.
Indi
cates date and time
whe
n setup values
wer
e changed.
n/a
Pump dose valves did
not actuate.
Ve
rify air pressure
to
solenoid valves.
Ve
rify the valves are
ac
tuating.
Motor could not drive
pumps and linear
actuator.
Verify motor is driving
the pump.
EF
0#
Alarm Timeout
Startup
Pump #
Pump tried but was not
able to move to the
home position within
a specified amount of
time.
Pump stroke length
is shortened by
mechanical system
tolerance.
V
erify correct
assembly of linear
actuator and pump
piston rods. See pump
manual.
3A2800B 15