User's Manual

Technical Data
Technical Data
Positive Displ
acement
Proportioner
U.S.
Metric
Maximum fluid w
orking
pressure:
MC1000 Air Sp
ray
Systems
300 psi 2.1 MPa, 21 bar
MC2000 Air-
Assisted
Spray Syste
ms
1500 psi 10.5 MPa, 105 bar
Maximum working air
pressure:
100 psi 0.7 MPa, 7.0 bar
Air supply: 85–100 psi
0.6–0.7 MPa, 6.0–7.0 bar)
Air filter inlet size: 3/8 npt(f)
Air filtration for air logic
(user-supplied):
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing
air (user-supplied):
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range:
0.1:1 — 50:1, ±1%
Fluids handled:
one or two component:
•solve
nt and waterborne paints
• polyu
rethanes
• epox
ies
•acid
catalyzed varnishes
•mois
ture sensitive isocyanates
Vis
cosity range of fluid:
20–5000 centipoise
Flu
id filtration
(u
ser-supplied):
100meshminimum
Ma
ximum fluid flow:
80
0 cc/minute (depending on material viscosity)
Fluid outlet size:
1
/4 npt(m)
External power supply
requirements:
90 - 250 Vac, 50/60 Hz, 7 amps maximum draw
1
5 amp maximum circuit breaker required
8 to 14 AWG power supply wire gauge
Operating temperature
range:
36 to 122°F 2 to 50°C
Storage temperature
range:
—4 to 158°F —20 to 70°C
Weight (approximate):
195 lb 88 kg
Sound data: Less than 75 dB(A)
Wetted parts:
17–4PH, 303, 304 SST, Tungsten carbide (with nickel binder),
perfluoroelastomer; PTFE, PPS, UHMWPE
3A2800B 59