User's Manual

Installation
3A2894F 27
11.Route and Connect the Air
Hoses and Electrical Lines.
Secure the electrical lines to the boom using electrical
tape or zip ties.
NOTE: Securing the ground cable to the fluid plate is
required for the proper grounding of the machine.
NOTE: S100 and U100 models are shown below. For
P100 models, the V/P is located on the catalyst air con-
trols. Refer to Integrated Air Controls, page 18.
12.Assemble the Base (A) Mate-
rial Whip Hose.
Tighten all fittings to prevent leaking.
Label “102”
Label “103”
CAN Cable
Ground Cable
S100 Shown
Dispense End
Machine End