User's Manual

Setup
3A2894F 39
d. Set the fluid regulator adjustment to 40 psi
(280 kPa, 2.8 bar).
e. Place two separate containers on two separate
scales and zero the scales. These containers
will be used in step j.
NOTE: Weight units of the scales are to be set as
grams.
f. Navigate to setup Screen 2.
NOTE: Screen 2 is already shown if this procedure is
performed during the initial setup of the machine.
g. Activate to signal the machine of the fol-
lowing calibration shot.
h. MD2: Install the calibration nozzle onto the dis-
pense applicator.
i. Disengage the trigger lock.
Screen 2 - Recalibration
Screen 2 - Initial Calibration