User's Manual

Setup
40 3A2894F
j. Dispense the chemicals into two separate con-
tainers.
MD2: Chemical will be dispensed through the
applicator.
Ultra-lite: Chemical will be dispensed through
the calibration check assembly.
k. Continue to dispense the chemical into the con-
tainers until both status bars are complete.
NOTE: If the light tower is installed, a green light will be
illuminated when the status bars are complete.
l. Weigh both containers separately and input the
values of both chemicals into setup Screen 2.
NOTE: To change a value in a desired field, perform the
following.
• Press or to highlight the
desired field to be changed.
• Press to activate the desired field or to
activate/deactivate an option.
• Press or to change the value of the
selected field.
• Press to set the value.
NOTE: Weight units are in grams.