User's Manual

Setup
3A2894F 41
m. Press to signal the machine that the cali-
bration procedure is complete. The machine will
automatically calculate the K factor of both
materials.
n. Engage the trigger lock.
o. MD2: Remove the calibration nozzle and install
a static mixer on the dispense valve.
p. Navigate to the Home screen.
5. Set the Display Module (DM).
Perform the following tasks to fully setup the DM. Refer
to Appendix A - DM Icons Overview, page 64, for clar-
ity.
a. Define general system settings. See Screen 3,
page 66.
b. Define specific system settings. See Screen 1,
page 66.
c. P100 with Ultra-Lite Tri-core Mixer: Select the
85 psi (5.9 bar) option box. See Screen 1,
page 66.