User's Manual

Base Purge
44 3A2894F
Base Purge
Base purge results in the purging of the base (A) chemi-
cal through the dispense valve. Base purging prevents
mixed material within the dispense applicator from cur-
ing. The machine will remain pressurized and electri-
cally connected.
1. Navigate to the Purge/Prime screen.
NOTE: Verify both pumps are activate.
2. Close the catalyst (B) ball valve located near the
dispense applicator.
3. Dispense material into a waste container until only
the base (A) chemical is present.
4. Engage the trigger lock.