User's Manual

Maintenance

54 3A2894F

Software Update Procedure

When software is updated on the DM, the software is

then automatically updated on all connected GCA com-

ponents. A status screen is shown while the software is

updating to indicate the progress.

Refer to PKE 2823 found at

http://graco.custhelp.com/app/answers/detail/a_id/2823/

or by utilizing the QR code below for software version

history.

1. Turn the power switch to OFF.

2. Remove the DM from the bracket.

3. Remove the token access panel.

4. Insert and press software upgrade token (Token

part no.16V853) firmly into the slot.

5. Install the DM onto the bracket.

6. Turn the power switch to ON.

NOTE: When the screen turns on, the following screen

will appear.

7. Remove the token.

8. Replace the token access panel.

9. Press to continue.

IG. 12: Remove Access Cover

NOTICE

A status is shown while software is updating to indi-

cate progress. To prevent corrupting the software

load, do not remove token until the status screen dis-

appears.

Icon Description

Update successful.

Update unsuccessful.

Update complete, no changes necessary

Update was successful/complete but one

or more GCA modules did not have a

CAN boot-loader, so the software was not

updated in that module.