Car Seat/Booster Seat Owner’s Manual Model 8488 READ THIS MANUAL. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Table of Contents 1.0 Warnings to Parents and Other Users . . . . . .3 2.0 Registration Information . . . . . . . . . . . . . . . . .4 2.1 Register Your Car Seat . . . . . . . . . . . . . . . .4 2.2 Recall Information . . . . . . . . . . . . . . . . . . . .4 2.3 If You Need Help . . . . . . . . . . . . . . . . . . . .4 3.0 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Important Information . . . . . . . . . . . . . . . . .7-10 4.1 Warnings . . . . . . . . . . . . . . . . . . . . .
1.0 Warnings to Parents and Other Users Failure to properly use this car seat increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Your child’s safety depends on you installing and using this car seat correctly. Even if using this car seat seems easy to figure out on your own, it is very important to READ THE OWNER’S MANUAL and the vehicle owner’s manual. Your child’s safety depends on: 1. Choosing the correct mode of use for the car seat depending on your child’s size. 2.
2.0 Registration Information Model Number: Manufactured in: Purchase Date: 2.1 Register Your Car Seat Please fill in the above information. The model number can be found on a label underneath your car seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and model number to: Graco Children’s Products Inc. P.O.
3.
Junction plate storage Locking clip storage* Tether strap** Owner’s manual storage compartment Metal junction plate — Expiration date Tether clip *The locking clip is stored on the back of the car seat. You will need to use it with certain types of vehicle seat belts. **Vehicles are now (or can be) equipped with tether anchor points behind some seats. A tether anchors the top of the car seat to the body of the vehicle.
4.0 Important Information 4.1 Warnings • DO NOT INSTALL OR USE THIS CAR SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL. DO NOT let others install or use the car seat unless they understand how to use it. • FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SHARP TURN, SUDDEN STOP OR CRASH. Your child can be injured in a vehicle even if you are not in a crash.
• STOP USING CAR SEAT AND THROW IT AWAY after the date molded into the back of the car seat. • DO NOT MODIFY YOUR CAR SEAT or use any accessories or parts supplied by other manufacturers. • NEVER USE CAR SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged car seat harness or vehicle seat belt. • THE CAR SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these parts can burn your child’s skin.
4.2 Height and Weight Limits FAILURE TO USE CAR SEAT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of this car seat and your vehicle’s seat belt differ greatly depending on the size of your child. Be sure you are using the car seat in the correct mode and with the correct features for your child.
4.2.1 WITH Built in Harness Your child MUST meet all requirements: • WEIGHT: 20 to 40 lbs. (9 to 18 kg) • HEIGHT: 27 to 43 inches (69 to 109 cm) • At least one year old and can sit upright unassisted • Shoulders are BELOW top harness slots. If shoulders are above top harness slots, child is too large for built-in harness. If child is between 30 and 40 lbs.
5.0 Car Seat Location 5.1 Vehicle Seat Requirements IMPROPER PLACEMENT OF THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may not be safe for this car seat. Some vehicles do not have any seating positions that can be used safely with the car seat. If you are not sure where to place the car seat in your vehicle, consult your vehicle owner’s manual or Graco Children's Products Inc., 1-888-224-6549.
5.2 Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CAR SEAT. THE VEHICLE SEAT BELT MUST BE DESIGNED TO HOLD THE CAR SEAT TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much like seat belts that are safe to use. If you are unsure, consult your vehicle owner’s manual or Graco Children's Products Inc., 1-888-224-6549. 5.2.
• Passive Restraint Lap or Shoulder Belt Mounted on Door • Passive Restraint Lap Belt with Motorized Shoulder Belt DO NOT use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed.
5.2.2 SAFE Vehicle Belt Systems THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CAR SEAT, IF the seat location meets all other requirements of these instructions and those in your vehicle owner's manual. For Built-in Harness Only • Lap Belts - Manually Adjusted When buckled, the belt is tightened manually by pulling on the excess belt. • Lap Belts with Automatic Locking Retractor (ALR) The automatic locking retractor will not permit the lap belt to lengthen once it is buckled.
With OR Without Built-in Harness • Combination Lap/Shoulder Belt with Locking Latch Plate Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the car seat. • Combination Lap/Shoulder Belt with Sliding Latch Plate This belt has a latchplate that slides freely along the belt.
To Install Locking Clip: 1. Tighten the buckled belt by pushing down hard on the car seat and pulling hard on the shoulder belt. 2. While pushing down on seat, pinch the two straps together behind the the buckle tongue. Unbuckle the belt without allowing it to slip. 3. Connect lap and shoulder belts as shown . 4. Rebuckle belt. Check that lap belt does not move by pulling hard. If belt loosens or lengthens, repeat procedure. Remove locking clip when not using car seat.
6.0 Using Car Seat WITH Built-in Harness 6.1 Positioning the Harness Straps FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your child. 1. Open harness clip . 2. Unbuckle harness straps . 3. Place child in the seat.
4. Check the crotch strap. Choose the position that is closest to but not under your child. To move the strap: Reach under seat and push the metal retainer up through the slot sideways . Place the retainer in the appropriate slot. Pull on buckle to make sure it is secure. 5. The harness straps must go into the slots even with or just above the shoulders . 6. If straps are in the proper slots, go to step 11 on page 20. 7. To adjust harness straps: Remove straps from metal junction plate .
8. Pull strap ends through slots and reinsert them in the correct slots as determined in step 5. 9. Reassemble straps onto metal junction plate exactly as shown . Check that straps are completely within the slots. 10. Check that the straps are inserted at the same level and that they are not twisted. Pull on harness to make sure it is secure.
11. Harness Adjustment Loosen the harness straps by fully pushing in the red adjustment button on the front of the seat and pulling the straps out at the shoulders as shown . (See also Section 6.3, Securing Your Child in the Car Seat, page 23.) REMEMBER to check the shoulder and crotch straps as your child grows and move them to the next position when necessary.
6.2 Securing the Car Seat in Your Vehicle FAILURE TO PROPERLY SECURE THE CAR SEAT IN THE VEHICLE INCREASES THE CHILD’S RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle owner’s manual to be sure your car seat is properly located, positioned, and held tightly at all times. 1. Place the car seat firmly against the back of a forward-facing vehicle seat. 2.
4. Tighten vehicle seat belt Push down hard with your knee or free hand in the middle of the car seat . Then pull and tighten the vehicle belt. For more information on how to tighten the belt for your seat belt system, see Section 5.2 Vehicle Seat Belt Requirements, pp. 12-16, or your vehicle owner’s manual. 5. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 28. When not using the tether, push it behind the car seat or in the vehicle seat crease. 6.
6.3 Securing Your Child in the Car Seat FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. In a crash, the car seat provides NO protection for your child unless the harness straps are properly secured. Follow these instructions carefully to properly secure your child. • ADJUST THE HARNESS SYSTEM SNUGLY EVERY TIME you place your child in the car seat. • Avoid bulky clothing. 1.
3. Pull the adjustment strap to securely tighten the harness . 4. Fasten harness clip . Position harness clip at middle of child’s chest, level with armpits. 5. Make sure straps are flat and tight against child’s shoulders. You should not be able to insert more than one finger between harness and child’s shoulder .
7.0 Using Car Seat WITHOUT Built-in Harness FAILURE TO PROPERLY SECURE YOUR CHILD AND THE BOOSTER SEAT IN YOUR VEHICLE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat . NEVER use a vehicle lap-only belt across front of child . Vehicle belts MUST lay flat against child and MUST not be twisted.
7.1 Harness Removal 1. Remove harness straps from metal junction plate. See figure 3 on page 18 for more help. Pull the straps through harness slots. Do not remove buckles or harness clip from straps . Push straps, buckles and harness clip through bottom of seat. 2. Remove crotch strap. See figure 1 on page 18 for more help. Buckle crotch strap to harness and fasten harness clip together for storage. 3. Metal junction plate and strap are not removable.
7.2 Securing Child and Booster Seat in Vehicle 1. Place car seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only. 2. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 28. 3. Place child in car seat with child’s back flat against back of car seat. 4. Position lap/shoulder belt as shown . Fasten buckle and pull up on the shoulder belt to tighten. 5.
8.0 Additional information 8.1 Using the Tether If you want to use the tether, check your vehicle owner’s manual for the location(s). If your vehicle is not equipped with a tether anchor, it may be possible to install one. Contact your vehicle dealership for the proper anchor location and installation. You may purchase tether anchor parts kit by calling Graco Customer Service at 1-888-224-6549. 1. Check that tether is securely attached to car seat. 2. Fasten tether clip to anchor point . 3.
8.2 Airplane Use This restraint is certified for use in Motor Vehicles. It is certified for use in Aircraft ONLY when used with the built-in harness. When used as a booster without the harness, this restraint is NOT certified for use in aircraft because there is no shoulder belt available. Important points to remember 1. Airlines have some restrictions about the use of car seats. 2. Install your car seat on an airplane in the same way it is installed in an automobile with a lap belt (see Section 6.
9.0 Care and Maintenance • CONTINUOUS USE OF CAR SEAT MAY CAUSE DAMAGE TO VEHICLE SEAT. Use a car seat mat, towel or thin blanket to protect upholstery. • METAL AND PLASTIC PARTS: clean with mild soap and cool water. No bleach or detergents. • HARNESS STRAPS: spot clean or replace. Do not immerse the straps in water. Doing so may weaken the harness straps. • BUCKLE AND HARNESS ADJUSTER: clean with a damp cloth. • NEVER LUBRICATE THE BUCKLE.
To Remove Seat Cover 1. Remove harness and crotch straps (see Section 7.1, Harness Removal for help). 2. Remove elastic loops and hooks from seat as shown . 3. Under the front of the seat push in the tab to remove the adjustment button plate . 4. Turn adjustment plate sideways and work it through the hole in the seat cover . It will be a tight fit so be careful not to tear the seat cover. 5. Lift cover off seat, pushing harness straps, crotch strap and hardware through slots in cover.
6. Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH. 7. To put the seat cover back on, reverse preceding instructions. Push the adjustment plate and strap through the hole in the seat cover. Be careful not to tear the seat cover. 8. Insert the two fingers of the adjustment plate into the back of the hole in the seat 9. Push the fabric up so that the tab under the adjustment plate is under the cloth . Snap the adjustment plate back on the seat .
10.Thread the harness straps through the appropriate holes in the seat cover. See the illustration at right and section 6.1, “Positioning the Harness Straps” (page 17) to properly secure the harness straps back on the seat . 11. Secure the seat cover to the seat by reattaching the elastic loops and hooks to the seat.
10.0 Replacement Parts How to Order: Complete the form that follows. Your car seat model number MUST be included on the form to ensure proper replacement parts. Your model number can be found on a sticker on the underside of your car seat. Payment must accompany your order. Parts may also be ordered from Graco’s web site at www.gracobaby.com. Parts List: . . . . . . . . . . . . . . . . .Price:* Locking clip . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.
Model No. (Number Required) Subtotal: Locking clip Harness strap with buckle tongues and harness clip Seat cover Crotch strap w/buckle Tether strap Harness Clip Cupholder Shipping & handling*: $5.00 Sales tax**: Total: * $15.00 outside the continental U.S. **CA 6%, IL 6.25%, IN 5%, NY 8.25%, OH 5.75%, PA 6%, SC 5% Check or money order enclosed (payable to Graco Children’s Products Inc.
Keep this manual in the storage compartment on the back of the car seat. Graco Children’s Products Inc.
Asiento para automóvil/silla alta Manual del propietario Modelo 8488 LEA ESTE MANUAL. No instale ni use este asiento para automóvil hasta que haya leído y entendido las instrucciones en este manual.
Índice de materias 1.0 Advertencias a padres y otros usuarios . . . . . . . . . . .3 2.0 Información sobre el registro . . . . . . . . . . . . . . . . . . . .4 2.1 Registre su asiento para automóvil . . . . . . . . . . . . .4 2.2 Información sobre el retiro de productos del mercado .4 2.3 Si necesita ayuda . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.0 Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Información importante . . . . . . . . . . . . . . . . . . . . .
1.0 Advertencias a padres y otros usuarios No usar debidamente este asiento para automóvil aumenta el riesgo de lesiones serias o muerte en una curva cerrada, parada repentina o accidente. La seguridad de su niño depende de que usted instale y use este asiento para automóvil correctamente. A pesar de que el uso de este asiento para automóvil parezca fácil de descifrar, es muy importante LEER EL MANUAL DEL PROPIETARIO y el manual del propietario del vehículo. La seguridad de su niño depende de: 1.
2.0 Información sobre el registro Número de modelo: Fabricado en: Fecha de compra: 2.1 Registre su asiento para automóvil Por favor, complete la información que se solicita más arriba. El número de modelo pueden encontrarse en una etiqueta ubicada debajo del asiento para automóvil. Llena la tarjeta postal de registro prepagada que se encuentra en la tapa del asiento y envíela hoy mismo. Los dispositivos de seguridad para niños podrán ser retirados del mercado por problemas de seguridad.
2.3 Si necesita ayuda Por favor, comuníquese con el Departamento de Servicio al Cliente con cualquier pregunta que pudiera tener sobre piezas, uso o mantenimiento. Cuando se ponga en contacto con nosotros, por favor tenga listo los números de modelo y de serie de su producto para que lo podamos ayudar más eficientemente. Estos números pueden encontrarse en una etiqueta ubicada abajo del asiento para automóvil. 1-888-224-6549 o www.gracobaby.com 3.
Almacenamiento de la traba de seguridad* Almacenaje para la placa de unión Correa de la soga** Compartimiento de almacenamiento del manual del propietario Placa de unión metálica — Fecha de vencimiento Traba de la soga *La traba de seguridad se guarda en el respaldo del asiento para automóvil. Necesitará usarlo con ciertos tipos de cinturones de seguridad de automóviles. **Los vehículos ahora vienen equipados (o pueden estar equipados) con puntos de sujetación de la soga detrás de algunos asientos.
4.0 Información importante 4.1 Advertencias • NO INSTALE NI USE ESTE ASIENTO PARA AUTOMÓVIL HASTA QUE HAYA LEÍDO Y ENTENDIDO LAS INSTRUCCIONES EN ESTE MANUAL Y EN EL MANUAL DEL PROPIETARIO DE SU VEHÍCULO. NO deje que otros instalen o usen el asiento del automóvil a menos que entiendan cómo usarlo. • NO USAR DEBIDAMENTE ESTE ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE.
• CAMBIE EL ASIENTO PARA AUTOMÓVIL DESPUÉS DE UN ACCIDENTE DE CUALQUIER TIPO. Un accidente puede causar daño invisible al asiento para automóvil. • DEJE DE USAR EL ASIENTO PARA AUTOMÓVIL Y TÍRELO después de la fecha que aparece moldeada en el respaldo del asiento para automóvil. • NO MODIFIQUE EL ASIENTO PARA AUTOMÓVIL ni use accesorios o piezas suministradas por otros fabricantes. • NUNCA USE EL ASIENTO PARA AUTOMÓVIL SI TIENE PIEZAS DAÑADAS O QUE FALTAN.
4.2 Limitaciones de peso y altura NO USAR EL ASIENTO PARA AUTOMÓVIL DE MANERA APROPIADA SEGÚN EL TAMAÑO DE SU NIÑO PODRÍA AUMENTAR EL RIESGO DE SUFRIR UNA LESIÓN SERIA O LA MUERTE. Las instrucciones para el uso de este asiento para automóvil y el cinturón de seguridad del vehículo difieren mucho dependiendo del tamaño de su niño. Asegúrese de que usa el asiento para automóvil de la manera correcta y con las funciones correctas para su niño.
4.2.1 CON el arnés incorporado Su niño DEBE CUMPLIR todos los requisitos: • PESO: 20 a 40 libras (9 a 18 kg) • ALTURA: 27 a 43 pulgadas (69 a 109 cm) • Por lo menos debe tener un año de edad y debe poder sentarse sin ayuda • Los hombros están DEBAJO de las ranuras superiores del arnés. Si los hombros están por encima de las ranuras superiores del arnés, el niño es demasiado grande para usar el arnés incorporado.
5.0 Ubicación del asiento para automóvil 5.1 Requisitos del asiento del vehículo UNA COLOCACIÓN INADECUADA DEL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE SUFRIR UNA LESIÓN SERIA O LA MUERTE. Algunas posiciones de sentado en su vehículo podrían no ser seguras para este asiento para automóvil. Algunos vehículos no tienen posiciones de sentado que puedan usarse seguramente con el asiento para automóvil.
5.2 Requisitos del cinturón de seguridad del vehículo MUCHOS SISTEMAS DE CINTURONES PARA SEGURIDAD NO SON SEGUROS CUANDO SE LOS USA CON EL ASIENTO PARA AUTOMÓVIL. EL CINTURÓN DE SEGURIDAD DEL VEHÍCULO DEBE HABER SIDO DISEÑADO PARA MANTENER EL ASIENTO PARA AUTOMÓVIL APRETADAMENTE EN TODO MOMENTO. Preste mucha atención a estos sistemas ya que muchos de los sistemas de cinturones de seguridad que no son seguros parecen iguales a los que son seguros.
• Cinturón pasivo Cinturón para el hombro o la falda montado en la puerta • Cinturón pasivo Cinturón para la falda con cinturón para el hombro motorizado NO use los cinturones del vehículo que estén conectados a la puerta de manera alguna o que se muevan a través de un carril para rodear automáticamente al pasajero cuando se cierra la puerta.
5.2.2 Sistemas SEGUROS de cinturones de vehículos LOS SIGUIENTES SISTEMAS DE CINTURONES PUEDEN USARSE CON SU ASIENTO PARA AUTOMÓVIL, SI la ubicación del asiento cumple todos los otros requisitos de estas instrucciones y las del manual del propietario del vehículo. Para el arnés incorporado solamente • Cinturones para la falda - ajustado manualmente Cuando se activa la hebilla, el cinturón se ajuste manualmente tirando del exceso del cinturón.
Con O sin el arnés incorporado • Combinación cinturón para el hombro/falda con placa de seguridad con traba Una vez que está trabado en la hebilla, este tipo de cinturón tiene una placa de seguridad que no permitirá que la parte del cinturón que está en la falda se afloje. El cinturón se ajusta tirando con fuerza de la parte del hombro del cinturón del vehículo mientras empuja con fuerza el asiento para automóvil hacia abajo.
Para instalar la traba de seguridad: 1. Ajuste el cinturón trabado empujando con fuerza el asiento para automóvil hacia abajo y tirando con fuerza el cinturón del hombro. 2. Mientras empuja el asiento hacia abajo, apriete las dos correas juntas detrás de la lengua de la hebilla. Destrabe el cinturón sin permitir que se mueva. 3. Conecte los cinturones del hombro y de la falda como se indica . 4. Vuelva a poner el cinturón en la hebilla. Verifique que el cinturón de la falda no se mueve tirando con fuerza.
6.0 Uso del asiento para automóvil CON arnés incorporado 6.1 Colocación de las correas del arnés NO AJUSTAR DEBIDAMENTE LAS CORREAS DEL ARNÉS DE SU NIÑO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Ajuste apretadamente los cinturones provistos con este sistema de seguridad alrededor de su niño 1. Abra la traba del arnés . 2. Destrabe las correas del arnés . 3. Coloque al niño en el asiento.
4. Verifique la correa de la entrepierna. Elija la posición más cercana pero no debajo de su niño. Para mover la correa: Debajo del asiento, empuje el retén metálico hacia arriba por la ranura de lado . Coloque el retén en la ranura apropiada. Tire de la hebilla para asegurarse de que esté bien sujeta. 5. Las correas del arnés deben pasar por las ranuras a la altura o apenas por encima de los hombros . 6. Si las correas están en las ranuras correctas, vaya al paso 11 de la página 20. 7.
8. Tire los extremos de las correas a través de las ranuras y vuelva a insertarlos en las ranur as correctas como se determina en el paso 5. 9. Vuelva a montar las correas en la placa de unión metálica exactamente como se indica . Verifique que las correas estén completamente dentro de las ranuras. 10. Verifique que las correas se inserten al mismo nivel y que no estén dobladas. Tire del arnés para asegurarse que esté asegurado.
11. Ajuste del arnés Suelte las correas oprimiendo completamente el botón rojo de ajustes en el lado delantero del asiento y tirando de las correas hacia fuera en los hombros como se indica . (Vea también la Sección 6.3, Cómo asegurar su niño al asiento para automóvil, página 23.) RECUERDE verificar las correas para la entrepierna y del hombro a medida que su niño crece y muévalas a la posición siguiente cuando sea necesario.
6.2 Asegurar el asiento para automóvil en su vehículo NO AJUSTAR DEBIDAMENTE EL ASIENTO PARA AUTOMÓVIL EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Cumpla detenidamente estas instrucciones y las del manual del propietario de su vehículo para asegurarse que el asiento para automóvil esté debidamente ubicado, colocado y asegurado apretadamente en todo momento. 1.
4. Ajuste el cinturón de seguridad del vehículo Empuje con fuerza hacia abajo con la rodilla o la mano libre en el medio del asiento para automóvil . Luego tire y ajuste el cinturón del vehículo. Para obtener más información sobre cómo ajustar el cinturón de su sistema del cinturón de seguridad, vea la Sección 5.2, Requisitos del cinturón de seguridad del vehículo, páginas 12 a 16, o el manual del propietario de su vehículo. 5.
6.3 Asegurar a su niño en el asiento del automóvil NO AJUSTAR DEBIDAMENTE A SU NIÑO EN EL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. En un accidente, el asiento para automóvil NO ofrece protección a su niño a menos que las correas del arnés estén debidamente aseguradas. Cumpla estas instrucciones detenidamente para asegurar debidamente a su niño.
3. Tire de la correa de ajustes para apretar el arnés . 4. Asegure la traba del arnés . Coloque la traba del arnés en el medio del pecho del niño, nivelado con las axilas. 5. Asegúrese que las correas estén planas y ajustadas contra los hombros del niño. No deberá poder insertar más que un dedo entre el arnés y el hombro del niño .
7.0 Uso del asiento para automóvil SIN el arnés incorporado NO AJUSTAR DEBIDAMENTE A SU NIÑO Y LA SILLA ALTA EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Use solamente el sistema de cinturón para el hombro y la falda del vehículo cuando sujeta a su niño en la silla alta . NUNCA use un cinturón del vehículo para la falda solamente a través del frente de su niño .
7.1 Eliminación del arnés 1. Quite las correas de la placa de unión metálica. Vea la figura 3 en la página 18 para más ayuda. Tire de las correas por las ranuras del arnés. No quite las hebillas ni el gancho del arnés de las correas . Empuje las correas, las hebillas y el gancho del arnés por el fondo del asiento. 2. Saque la correa para la entrepierna. Vea la figura 1 en la página 18 para obtener más ayuda. Abroche la correa de la entrepierna al arnés y conecte el gancho del arnés para su almacenaje. 3.
7.2 Asegurar al niño y la silla alta en el vehículo 1. Coloque el asiento para automóvil mirando hacia adelante y firmemente contra el respaldo del asiento del vehículo equipado solamente con un cinturón para el hombro y la falda. 2. Si desea usar la correa de la soga para mantener el asiento en su lugar, asegúrela ahora mismo. Vea la Sección 8.1 Uso de la soga, página 28. 3. Coloque al niño en el asiento para automóvil con la espalda del niño plana contra el respaldo del asiento para automóvil. 4.
8.0 Información adicional 8.1 Uso de la soga Si desea usar la soga, consulte el manual del propietario de su vehículo para determinar los lugares. Si su vehículo no está equipado con un sujetador de soga, podría ser posible instalar uno. Contacte al concesionario de su vehículo para determinar el lugar correcto del sujetador y su instalación. Puede comprar un juego de piezas para sujetar la soja llamando al Servicio al Cliente de Graco al 1-888-224-6549. 1.
8.2 Uso en aeronaves Este sistema de seguridad ha sido certificado para ser usado en vehículos automotor. Ha sido certificado para uso en aeronaves SOLAMENTE cuando se lo usa con el arnés incorporado. Cuando se lo usa como silla alta sin el arnés, este sistema NO ha sido certificado para ser usado en aeronaves porque no hay cinturón del hombro disponible. Puntos importantes que recordar: 1. Las aerolíneas tienen ciertas restricciones sobre el uso de los asientos para automóviles. 2.
9.0 Atención y mantenimiento • USO CONTINUO DEL ASIENTO PARA AUTOMÓVIL PODRÍA CAUSAR DAÑO AL ASIENTO DEL VEHÍCULO. Use una estera para asiento del automóvil, toalla o frazada fina para proteger el tapizado. • PIEZAS DE METAL Y DE PLÁSTICO: limpiar con un jabón suave y agua fresca. No use cloro ni detergentes. • CORREAS DEL ARNÉS: limpie el lugar sucio. No sumerja las correas en agua. Hacerlo podría aflojar las correas del arnés. • AJUSTADOR DE LA HEBILLA Y EL ARNÉS: limpiar con un trapo húmedo.
Para sacar la funda del asiento 1. Quite las correas del arnés y de la entrepierna (Vea la Sección 7.1, Eliminación del arnés para ayuda). 2. Quite los bucles elásticos y los ganchos del asiento como se indica . 3. Debajo de la parte delantera del asiento, oprima la lengüeta para quitar la placa del botón de ajustes . 4. Ponga la placa de ajustes de lado y pásela por el agujero en la funda del asiento . La apertura es muy estrecha, así que asegúrese de no romper la funda. 5.
6. Lave la funda a máquina en agua fría en el ciclo delicado y déjelo secar al aire. NO USE LEJÍA. 7. Para colocar la funda de nuevo, siga los pasos anteriores en orden inverso. Empuje la placa de ajustes y la correa por el agujero en la funda. Asegúrese de no romper la funda. 8. Inserte las dos lengüetas de la placa de ajustes en la parte trasera del agujero del asiento . 9. Empuje la tela hacia arriba para que la lengüeta debajo de la placa de ajustes quede debajo de la tela .
10.Pase las correas de arnés por los agujeros apropiados en la funda del asiento. Vea la ilustración a la derecha y en la sección 6.1, "Colocación de las correas del arnés" (página 17) para volver a colocar las correas del arnés en el asiento correctamente . 11. Sujete la funda al asiento volviendo a colocar los bucles elásticos y los ganchos en el asiento.
10.0 Piezas de repuesto Cómo hacer pedidos: Complete el formulario que sigue. El número de modelo de su asiento para automóvil DEBEN incluirse en el formulario para asegurarse que recibirá las piezas de repuesto correctas. El número del modelo puede encontrarse en una etiqueta ubicado abajo de su asiento para automóvil. Debe incluir el pago con su pedido. También se pueden solicitar las piezas del sitio web de Graco en www.gracobaby.com. Lista de piezas: . . . . . . . . . . . .Precio:* Traba de seguridad .
Model No. • N° de modelo ( Number Required/Se requieren número) Total • Total: Locking clip/ Traba de seguridad Shipping & handling*: Gastos de envío*: Harness strap with buckle tongues and harness clip/ Arnés con hebilla y traba del arnés $5.00 Sales tax**: Impuestos**: Total due Total a pagar: *$15.00 outside the continental U.S. *US$ 15,00 para fuera del continente de EE.UU **CA 6%, IL 6.25%, IN 5%, NY 8.25%, OH 5.
Guarde este manual en el compartimiento de almacenamiento en el respaldo del asiento para automóvil. Graco Children’s Products Inc.