Car Seat/Booster Seat Owner’s Manual Model 8486, 8490 READ THIS MANUAL. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Table of Contents 1.0 Warnings to Parents and Other Users . . . . . . . .3 2.0 Registration Information . . . . . . . . . . . . . . . . . . .4 2.1 Register Your Car Seat . . . . . . . . . . . . . . . . . .4 2.2 Recall Information . . . . . . . . . . . . . . . . . . . . .4 2.3 If You Need Help . . . . . . . . . . . . . . . . . . . . . .4 3.0 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Important Information . . . . . . . . . . . . . . . . . . .7-10 4.1 Warnings . . . . . . . .
1.0 Warnings to Parents and Other Users Failure to properly use this car seat increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Your child’s safety depends on you installing and using this car seat correctly. Even if using this car seat seems easy to figure out on your own, it is very important to READ THE OWNER’S MANUAL and the vehicle owner’s manual. Your child’s safety depends on: 1. Choosing the correct mode of use for the car seat depending on your child’s size. 2.
2.0 Registration Information Model Number: Manufactured in: Purchase Date: 2.1 Register Your Car Seat Please fill in the above information. The model number can be found on a label underneath your car seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and model number to: Graco Children’s Products Inc. P.O.
3.
Adjuster bar lock Harness plate Locking clip storage* Adjuster bar Owner’s manual storage compartment LATCH & Tether storage bars — Expiration date LATCH*** LATCH Connector Tether strap** Adjustment belt Tether clip *The locking clip is stored on the back of the car seat. You will need to use it with certain types of vehicle seat belts. **Vehicles are now (or can be) equipped with tether anchor points behind some seats. A tether anchors the top of the car seat to the body of the vehicle.
4.0 Important Information 4.1 Warnings • DO NOT INSTALL OR USE THIS CAR SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL. DO NOT let others install or use the car seat unless they understand how to use it. • FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SHARP TURN, SUDDEN STOP OR CRASH. Your child can be injured in a vehicle even if you are not in a crash.
• STOP USING CAR SEAT AND THROW IT AWAY after the date molded into the back of the car seat. • DO NOT MODIFY YOUR CAR SEAT or use any accessories or parts supplied by other manufacturers. • NEVER USE CAR SEAT IF IT HAS DAMAGED OR MISSING PARTS. DO NOT use a cut, frayed or damaged car seat harness, LATCH belt or vehicle seat belt. • THE CAR SEAT CAN BECOME VERY HOT IF LEFT IN THE SUN. Contact with these parts can burn your child’s skin.
4.2 Height and Weight Limits FAILURE TO USE CAR SEAT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of this car seat and your vehicle’s seat belt differ greatly depending on the size of your child. Be sure you are using the car seat in the correct mode and with the correct features for your child.
4.2.1 WITH Built-in Harness Your child MUST meet all requirements: • WEIGHT: 20 to 40 lbs. (9 to 18 kg) • HEIGHT: 27 to 43 inches (69 to 109 cm) • At least one year old and can sit upright unassisted • Shoulders are BELOW top harness slots. If shoulders are above top harness slots, child is too large for built-in harness. If child is between 30 and 40 lbs.
5.0 Car Seat Location 5.1 Vehicle Seat Requirements IMPROPER PLACEMENT OF THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may not be safe for this car seat. Some vehicles do not have any seating positions that can be used safely with the car seat. If you are not sure where to place the car seat in your vehicle, consult your vehicle owner’s manual or call Graco Children's Products Inc., 1-888-224-6549.
5.2 Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CAR SEAT. THE VEHICLE SEAT BELT MUST BE DESIGNED TO HOLD THE CAR SEAT TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much like seat belts that are safe to use. If you are unsure, consult your vehicle owner’s manual or call Graco Children's Products Inc., 1-888-224-6549. 5.2.
• Combination Lap/Shoulder Belt with Retractor Each strap has a retractor at one end and is attached to the latch plate at the other end. • Passive Restraint Lap or Shoulder Belt Mounted on Door • Passive Restraint Lap Belt with Motorized Shoulder Belt DO NOT use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed.
5.2.2 SAFE Vehicle Belt Systems THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CAR SEAT, IF the seat location meets all other requirements of these instructions and those in your vehicle owner's manual. LATCH can be used in place of the following vehicle restraint systems if your vehicle is equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations.
With OR Without Built-in Harness • Combination Lap/Shoulder Belt with Locking Latch Plate Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the car seat. • Combination Lap/Shoulder Belt with Sliding Latch Plate This belt has a latchplate that slides freely along the belt.
To Install Locking Clip: 1. Tighten the buckled belt by pushing down hard on the car seat and pulling hard on the shoulder belt. 2. While pushing down on seat, pinch the two straps together behind the buckle tongue. Unbuckle the belt without allowing it to slip. 3. Connect lap and shoulder belts as shown Ê. 4. Rebuckle belt. Check that lap belt does not move by pulling hard. If belt loosens or lengthens, repeat procedure. Remove locking clip when not using car seat. Store under it’s tab on the back of seat.
With LATCH Newer vehicles have one or more seating positions with LATCH anchorage systems. If vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at the vehicle seat crease. If not visible, they may be marked with the symbol below Ë. Ë Ì Í See your vehicle owner’s manual for exact locations, anchor identification, and requirements for use with a car seat. Typical seat in a passenger vehicle. Other vehicle types may have different LATCH locations.
6.0 Using Car Seat WITH Built-in Harness 6.1 Positioning the Harness Straps FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your child. Ê 1. Open harness clip Ê. Ë 2. Unbuckle harness straps Ë. 3. Place child in the seat.
4. Check the crotch strap. Choose the position that is closest to but not under your child. To move the strap: Reach under seat and push metal retainer up through the slot sideways Ì. Place the retainer in the appropriate slot. Pull on buckle to make sure it is secure. 5. The harness straps must go into the slots even with or just above the shoulders Í. 6. If straps are in the proper slots, go to step 11 on page 21. 7. To adjust harness straps: Remove straps from harness plate and adjuster bar Î.
8. Pull strap ends through slots and reinsert them in the correct slots Ê as determined in step 5. 9. Reassemble straps onto adjuster bar exactly as shown Ë. Ê Ë There must be some strap extended below the adjustment bar. Ì 10. Push adjuster bar down Ì. 11. Rotate red lock down Í.
11. Check that the straps are inserted at the same level and that they are not twisted. From the front of the seat, pull on harness to make sure it is secure. 12. Harness Adjustment Remove child from car seat. From behind the seat move the red lock up, lift adjuster bar and lengthen or shorten the straps as needed. (See also Section 6.3, Securing Your Child in the Car Seat, page 26.) REMEMBER to check the shoulder and crotch straps as your child grows and move them to the next position when necessary.
6.2 Securing the Car Seat in Your Vehicle FAILURE TO PROPERLY SECURE THE CAR SEAT IN THE VEHICLE INCREASES THE CHILD’S RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle owner’s manual to be sure your car seat is properly located, positioned, and held tightly at all times. 6.2.1 With a Vehicle Lap or Lap/shoulder Belt: Store LATCH. See Section 8.2, Storing LATCH, page 32. 1.
4. Tighten vehicle seat belt Push down hard with your knee or free hand in the middle of the car seat Ê. Then pull and tighten the vehicle belt. For more information on how to tighten the belt for your seat belt system, see Section 5.2 Vehicle Seat Belt Requirements, pp. 12-16, or your vehicle owner’s manual. 5. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31. When not using the tether, hook it on the tether storage bar on the back of the seat. 6.
6.2.2 With LATCH 1. For ease of installation, extend LATCH to its maximum length. 2. Place the car seat firmly against the back of a forward-facing vehicle seat. 3. Thread LATCH through the belt path normally used for the vehicle seat belt Ê. Belt must lay flat and not be twisted. 4. Hook LATCH Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached Ë. Ê Ë Ì 5. Tighten LATCH by pushing down hard on car seat and pulling the adjustment belt Ì. 6.
7. All LATCH seating positions have tether anchors. Secure the top of the seat using the tether strap. See Section 8.1 Using the Tether, page 31. When not using the tether, push it behind the car seat or in the vehicle seat crease. 8. Safety Check for Secure Installation Perform this test every time you drive with your child. Twist and pull car seat front to back and left to right to check that seat is secure Î. LATCH belt must stay tight. Car seat must be very tight.
6.3 Securing Your Child in the Car Seat FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. In a crash, the car seat provides NO protection for your child unless the harness straps are properly secured. Follow these instructions carefully to properly secure your child. • ADJUST THE HARNESS SYSTEM SNUGLY EVERY TIME you place your child in the car seat. • Avoid bulky clothing. 1.
3. Fasten harness clip Ë. Position harness clip at middle of child’s chest, level with armpits. 4. Make sure straps are flat and tight against child’s shoulders. You should not be able to insert more than one finger between harness and child’s shoulder Ì.
7.0 Using Car Seat WITHOUT Built-in Harness FAILURE TO PROPERLY SECURE YOUR CHILD AND THE BOOSTER SEAT IN YOUR VEHICLE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Ê You must always use a vehicle lap/shoulder belt to secure your child and the booster seat. LATCH will not secure your child in the booster seat. Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat Ê.
7.1 Harness Removal 1. Remove harness straps. See figure 5 on page 19 for more help. Open chest clip. Push the right strap and buckle down through right slot. Then pull completely up through the left hand slot Î. 2. Remove crotch strap. See figure 3 on page 19 for more help. Buckle crotch strap to harness and fasten harness clip for storage. 3. Reverse instructions to reinstall. See figure 2 on page 35 for the correct path for the harness.
7.2 Securing Child and Booster Seat in Vehicle 1. Place car seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only. 2. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31. 3. Place child in car seat with child’s back flat against back of car seat. 4. Position lap/shoulder belt as shown Ê. Fasten buckle and pull up on the shoulder belt to tighten. 5.
8.0 Additional information 8.1 Using the Tether All LATCH seating positions have teather anchors. If you want to use the tether, check your vehicle owner’s manual for the location(s). If your vehicle is not equipped with a tether anchor, it may be possible to install one. Contact your vehicle dealership for the proper anchor location and installation. You may purchase tether anchor parts kit by calling Graco Customer Service at 1-888-224-6549. 1. Check that tether is securely attached to car seat. 2.
8.2 Storing LATCH 1. For ease of storing, extend LATCH to its maximum length. 2. Locate the storage bars on back of car seat Ê. 3. Fasten ends of LATCH onto storage bars as shown. 4. After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened. 5. LATCH storage should look like this when complete Ê.
8.3 Airplane Use This restraint is certified for use in Motor Vehicles. It is certified for use in Aircraft ONLY when used with the built-in harness. When used as a booster without the harness, this restraint is NOT certified for use in aircraft because there is no shoulder belt available. Important points to remember: 1. Airlines have some restrictions about the use of car seats. 2. Install your car seat on an airplane in the same way it is installed in an automobile with a lap belt (see Section 6.
9.0 Care and Maintenance • CONTINUOUS USE OF CAR SEAT MAY CAUSE DAMAGE TO VEHICLE SEAT. Use a car seat mat, towel or thin blanket to protect upholstery. • METAL AND PLASTIC PARTS: clean with mild soap and cool water. No bleach or detergents. • HARNESS STRAPS AND LATCH STRAPS: spot clean or replace. Do not immerse the straps in water. Doing so may weaken the straps. • BUCKLE AND HARNESS ADJUSTER: clean with a damp cloth. • NEVER LUBRICATE THE BUCKLE.
To Remove Seat Cover 1. Remove harness and crotch straps (see Section 7.1, Harness Removal, p. 29 for help). 2. Remove elastic loops and hooks from seat as shown Ê. 3. Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH. 4. To put the seat cover back on, reverse preceding instructions. Thread the harness straps through the appropriate holes in the seat cover Ë.
10.0 Replacement Parts How to Order: Complete the form that follows. Your car seat model number MUST be included on the form to ensure proper replacement parts. Your model number can be found on a sticker on the underside of your car seat. Payment must accompany your order. Parts may also be ordered from Graco’s web site at www.gracobaby.com. Parts List: . . . . . . . . . . . . . . . . .Price:* Locking clip . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.
Model No. (Number Required) Subtotal: Locking clip Harness strap with buckle tongues and harness clip Seat cover Crotch strap w/buckle Tether strap Harness clip Cupholder LATCH Shipping & handling*: $5.00 Sales tax**: Total: * $15.00 outside the continental U.S. **CA 7.25%, IL 6.25%, IN 5%, NY 8.25%, OH 5.75%, PA 6%, SC 5% Check or money order enclosed (payable to Graco Children’s Products Inc.
Asiento para automóvil/ asiento para niños Manual del propietario Modelo 8486, 8490 LEA ESTE MANUAL. No instale ni use este asiento para automóvil hasta que haya leído y entendido las instrucciones en este manual.
Table of Contents 1.0 Advertencias a padres y otros usuarios . . . . . . . . . . .3 2.0 Información sobre el registro . . . . . . . . . . . . . . . . . . . .4 2.1 Registre su asiento para automóvil . . . . . . . . . . . . .4 2.2 Información sobre el retiro de productos del mercado .4 2.3 Si necesita ayuda . . . . . . . . . . . . . . . . . . . . . . . . . .5 3.0 Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Información importante . . . . . . . . . . . . . . . . . . . . .
1.0 Advertencias a padres y otros usuarios No usar debidamente este asiento para automóvil aumenta el riesgo de lesiones serias o muerte en una curva cerrada, parada repentina o accidente. La seguridad de su niño depende de que usted instale y use este asiento para automóvil correctamente. A pesar de que el uso de este asiento para automóvil parezca fácil de descifrar, es muy importante LEER EL MANUAL DEL PROPIETARIO y el manual del propietario del vehículo. La seguridad de su niño depende de: 1.
2.0 Información sobre el registro Número de modelo: Fabricado en: Fecha de compra: 2.1 Registre su asiento para automóvil Por favor, complete la información que se solicita más arriba. El número de modelo pueden encontrarse en una etiqueta ubicada debajo del asiento para automóvil. Llena la tarjeta postal de registro prepagada que se encuentra en la tapa del asiento y envíela hoy mismo. Los dispositivos de seguridad para niños podrán ser retirados del mercado por problemas de seguridad.
2.3 Si necesita ayuda Por favor, comuníquese con el Departamento de Servicio al Cliente con cualquier pregunta que pudiera tener sobre piezas, uso o mantenimiento. Cuando se ponga en contacto con nosotros, por favor tenga listo el número de modelo de su producto para que lo podamos ayudar más eficientemente. Estos números pueden encontrarse en una etiqueta ubicada abajo del asiento para automóvil. 1-888-224-6549 o www.gracobaby.com 3.
Traba de la barra de ajuste Placa del arnés Traba de seguridad* Barra de ajuste Compartimiento de almacenamiento del manual del propietario — Barras de almacenamiento del LATCH y la soga Fecha de vencimiento Cinturón de ajuste LATCH*** Correa de la soga** Traba de Conector del la soga LATCH *La traba de seguridad se guarda en el respaldo del asiento para automóvil. Necesitará usarlo con ciertos tipos de cinturones de seguridad de automóviles.
4.0 Información importante 4.1 Advertencias • NO INSTALE NI USE ESTE ASIENTO PARA AUTOMÓVIL HASTA QUE HAYA LEÍDO Y ENTENDIDO LAS INSTRUCCIONES EN ESTE MANUAL Y EN EL MANUAL DEL PROPIETARIO DE SU VEHÍCULO. NO deje que otros instalen o usen el asiento del automóvil a menos que entiendan cómo usarlo. • NO USAR DEBIDAMENTE ESTE ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE.
• • • • • • • • sujetado en el vehículo. Si no usa el LATCH, asegúrese que los conectores del LATCH estén debidamente almacenados en la parte de atrás del asiento para automóvil. CAMBIE EL ASIENTO PARA AUTOMÓVIL DESPUÉS DE UN ACCIDENTE DE CUALQUIER TIPO. Un accidente puede causar daño invisible al asiento para automóvi. DEJE DE USAR EL ASIENTO PARA AUTOMÓVIL Y TÍRELO después de la fecha que aparece moldeada en el respaldo del asiento para automóvil.
4.2 Limitaciones de peso y altura NO USAR EL ASIENTO PARA AUTOMÓVIL DE MANERA APROPIADA SEGÚN EL TAMAÑO DE SU NIÑO PODRÍA AUMENTAR EL RIESGO DE SUFRIR UNA LESIÓN SERIA O LA MUERTE. Las instrucciones para el uso de este asiento para automóvil y el cinturón de seguridad del vehículo difieren mucho dependiendo del tamaño de su niño. Asegúrese de que usa el asiento para automóvil de la manera correcta y con las funciones correctas para su niño.
4.2.1 CON el arnés incorporado Su niño DEBE CUMPLIR todos los requisitos: • PESO: 20 a 40 libras (9 a 18 kg) • ALTURA: 27 a 43 pulgadas (69 a 109 cm) • Por lo menos debe tener un año de edad y debe poder sentarse sin ayuda • Los hombros están DEBAJO de las ranuras superiores del arnés. Si los hombros están por encima de las ranuras superiores del arnés, el niño es demasiado grande para usar el arnés incorporado.
5.0 Ubicación del asiento para automóvil 5.1 Requisitos del asiento del vehículo UNA COLOCACIÓN INADECUADA DEL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE SUFRIR UNA LESIÓN SERIA O LA MUERTE. Algunas posiciones de sentado en su vehículo podrían no ser seguras para este asiento para automóvil. Algunos vehículos no tienen posiciones de sentado que puedan usarse seguramente con el asiento para automóvil.
5.2 Requisitos del cinturón de seguridad del vehículo MUCHOS SISTEMAS DE CINTURONES PARA SEGURIDAD NO SON SEGUROS CUANDO SE LOS USA CON EL ASIENTO PARA AUTOMÓVIL. EL CINTURÓN DE SEGURIDAD DEL VEHÍCULO DEBE HABER SIDO DISEÑADO PARA MANTENER EL ASIENTO PARA AUTOMÓVIL APRETADAMENTE EN TODO MOMENTO. Preste mucha atención a estos sistemas ya que muchos de los sistemas de cinturones de seguridad que no son seguros parecen iguales a los que son seguros.
• Combinación de cinturón para el hombro y de regazo con retractor Cada correa tiene un retractor en una punta y está conectada a la placa de seguridad en la otra punta. • Cinturón pasivo Cinturón para el hombro o de regazo montado en la puerta • Cinturón pasivo Cinturón de regazo con cinturón para el hombro motorizado NO use los cinturones del vehículo que estén conectados a la puerta de manera alguna o que se muevan a través de un carril para rodear automáticamente al pasajero cuando se cierra la puerta.
5.2.2 Sistemas SEGUROS de cinturones de vehículos LOS SIGUIENTES SISTEMAS DE CINTURONES PUEDEN USARSE CON SU ASIENTO PARA AUTOMÓVIL, SI la ubicación del asiento cumple todos los otros requisitos de estas instrucciones y las del manual del propietario del vehículo. El LATCH puede usarse en lugar de los siguientes sistemas de seguridad del vehículo si su vehículo está equipado con puntos de anclaje LATCH.
Con O sin el arnés incorporado • Combinación cinturón para el hombro/falda con placa de seguridad con traba Una vez que está trabado en la hebilla, este tipo de cinturón tiene una placa de seguridad que no permitirá que la parte del cinturón que está en de regazo se afloje. El cinturón se ajusta tirando con fuerza de la parte del hombro del cinturón del vehículo mientras empuja con fuerza el asiento para automóvil hacia abajo.
Para instalar la traba de seguridad: 1. Ajuste el cinturón trabado empujando con fuerza el asiento para automóvil hacia abajo y tirando con fuerza el cinturón del hombro. 2. Mientras empuja el asiento hacia abajo, apriete las dos correas juntas detrás de la lengua de la hebilla. Destrabe el cinturón sin permitir que se mueva. 3. Conecte los cinturones del hombro y de regazo como se indica Ê. 4. Vuelva a poner el cinturón en la hebilla. Verifique que el cinturón de regazo no se mueve tirando con fuerza.
Con LATCH Los vehículos nuevos pueden tener uno o varios asientos equipados con sistemas de anclaje LATCH. Si el vehículo viene equipado con LATCH, se pueden ver los puntos de anclaje inferiores en el pliegue del asiento del vehículo. Si no están visibles, pueden estar marcados con el símbolo que sigue Ë. Ë Ì Í Vea el manual del propietario de su vehículo para informarse sobre las ubicaciones exactas, la identificación de los anclajes y los requisitos de uso con el sistema de seguridad para niños.
6.0 Uso del asiento para automóvil CON el arnés incorporado 6.1 Colocación de las correas del arnés NO AJUSTAR DEBIDAMENTE LAS CORREAS DEL ARNÉS DE SU NIÑO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Ajuste apretadamente los cinturones provistos con este sistema de seguridad alrededor de su niño. 1. Abra la traba del arnés Ê. Ê Ë 2. Destrabe las correas del arnés Ë. 3. Coloque al niño en el asiento.
4. Verifique la correa para la entrepierna. Elija la posición que esté más cercana pero no debajo de su niño. Para mover la correa: Debajo del asiento, empuje el retén metálico hacia arriba por la ranura de lado Ì. Coloque el retén en la ranura apropiada. Tire de la hebilla para asegurarse de que está bien sujeta. 5. Las correas del arnés deben pasar por las ranuras a la altura o apenas por encima de los hombros Í. 6. Si las correas están en las ranuras correctas, vaya al paso 11 de la página 21. 7.
8. Tire los extremos de las correas a través de las ranuras y vuelva a insertarlos en las ranur as correctas Ê como se determina en el paso 5. Ê Ë 9. Vuelva a armar las correas en la barra de ajuste exactamente como se indica Ë. Debe quedar parte de la correa extendida por debajo de la barra de ajuste. Ì 10. Empuje la barra de ajuste hacia abajo Ì. 11. Gire la traba roja hacia abajo Í.
11. Verifique que las correas se inserten al mismo nivel y que no estén dobladas. Tire del arnés para asegurarse que esté asegurado. 12. Ajuste del arnés Quite al niño del asiento de seguridad infantil. Desde detrás del asiento, suba la traba roja, levante la barra de ajuste y alargue o acorte las correas según sea necesario. (Vea también la Sección 6.3, Asegurar a su niño en el asiento del automóvil, página 26.
6.2 Asegurar el asiento para automóvil en su vehículo NO AJUSTAR DEBIDAMENTE EL ASIENTO PARA AUTOMÓVIL EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Cumpla detenidamente estas instrucciones y las del manual del propietario de su vehículo para asegurarse que el asiento para automóvil esté debidamente ubicado, colocado y asegurado apretadamente en todo momento. 6.2.1 Con el cinturón del vehículo de regazo o regazo/hombro Guardar el LATCH.
Ê 4. Ajuste el cinturón de seguridad del vehículo Empuje con fuerza hacia abajo con la rodilla o la mano libre en el medio del asiento para automóvil Ê. Luego tire y ajuste el cinturón del vehículo. Para obtener más información sobre cómo ajustar el cinturón de su sistema del cinturón de seguridad, vea la Sección 5.2, Requisitos del cinturón de seguridad del vehículo, páginas 12 a 17, o el manual del propietario de su vehículo. 5.
6.2.2 Con LATCH 1. Para facilitar la instalación, extienda el LATCH hasta el máximo. 2. Coloque el asiento para automóvil firmemente contra el respaldo del asiento del vehículo mirando hacia adelante. 3. Pase el LATCH por el recorrido del cinturón que normalmente se usa para el cinturón del asiento del vehículo Ê. El cinturón debe mantenerse en posición plana sin torcerse. 4. Enganche los conectores a los sujetadores inferiores. Tire firmemente de los conectores para asegurarse que estén enganchados Ë. 5.
7. Todas las posiciones del asiento LATCH tienen puntos de anclaje. Asegure la parte de arriba del asiento usando la correa de la soga. Vea la Sección 8.1 Uso de la soga en la página 31. Cuando no usa el anclaje, engánchelo en la barra de almacenamiento del anclaje ubicada en la parte de atrás del asiento para automóvil. 8. Verificación de seguridad para una instalación segura Realice esta prueba cada vez que viaja con su niño.
6.3 Asegurar a su niño en el asiento del automóvil NO AJUSTAR DEBIDAMENTE A SU NIÑO EN EL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. En un accidente, el asiento para automóvil NO ofrece protección a su niño a menos que las correas del arnés estén debidamente aseguradas. Cumpla estas instrucciones detenidamente para asegurar debidamente a su niño.
3. Asegure la traba del arnés Ë. Coloque la traba del arnés en el medio del pecho del niño, nivelado con las axilas. Ë 4. Asegúrese que las correas estén planas y ajustadas contra los hombros del niño. No deberá poder insertar más que un dedo entre el arnés y el hombro del niño Ì.
7.0 Uso del asiento para automóvil SIN el arnés incorporado NO AJUSTAR DEBIDAMENTE A SU NIÑO Y LA ASIENTO PARA NIÑOS EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Debe usar siempre el cinturón para el hombro/regazo del vehículo para asegurar su niño y el asiento. El LATCH no asegurará su niño al asiento para automóvil.
7.1 Eliminación del arnés 1. Saque las correas del arnés. Vea la figura 4 en la página 19, para obtener más ayuda. Desabroche el gancho del pecho. Pase la correa de la derecha y la hebilla por la ranura de la derecha. Después tírelas completamente por la ranura de la izquierda Î. 2. Saque la correa para la entrepierna. Vea la figura 3 en la página 19 para obtener más ayuda. Abroche la correa de la entrepierna al arnés y conecte el gancho del arnés para su almacenaje. 3.
7.2 Asegurar al niño y el asiento para niños en el vehículo 1. Coloque el asiento para automóvil mirando hacia adelante y firmemente contra el respaldo del asiento del vehículo equipado solamente con un cinturón para el hombro y de regazo. 2. Si desea usar la correa de la soga para mantener el asiento en su lugar, asegúrela ahora mismo. Vea la Sección 8.1 Uso de la soga, página 31. 3. Coloque al niño en el asiento para automóvil con la espalda del niño plana contra el respaldo del asiento para automóvil. 4.
8.0 Información adicional 8.1 Uso de la soga Todas las posiciones del asiento LATCH tienen puntos de anclaje. Si desea usar la soga, consulte el manual del propietario de su vehículo para determinar los lugares. Si su vehículo no está equipado con un sujetador de soga, podría ser posible instalar uno. Contacte al concesionario de su vehículo para determinar el lugar correcto del sujetador y su instalación.
8.2 Almacenamiento del LATCH 1. Para facilitar el almacenamiento, extienda el LATCH hasta el máximo. 2. Ubique las barras de almacenamiento en la parte de atrás del asiento para automóvil Ê. 3. Ajuste los extremos de LATCH en las barras de almacenamiento como se indica. 4. Después de ajustarlo sobre la barra de almacenamiento, tire el cinturón de ajuste para asegurarse que el LATCH esté debidamente ajustado. 5. El almacenamiento del LATCH debería tener este aspecto cuando esté terminado Ê.
8.3 Uso en aeronaves Este sistema de seguridad ha sido certificado para ser usado en vehículos automotor. Ha sido certificado para uso en aeronaves SOLAMENTE cuando se lo usa con el arnés incorporado. Cuando se lo usa como asiento para niños sin el arnés, este sistema NO ha sido certificado para ser usado en aeronaves porque no hay cinturón del hombro disponible. Puntos importantes que recordar: 1. Las aerolíneas tienen ciertas restricciones sobre el uso de los asientos para automóviles. 2.
9.0 Cuidado y mantenimiento • USO CONTINUO DEL ASIENTO PARA AUTOMÓVIL PODRÍA CAUSAR DAÑO AL ASIENTO DEL VEHÍCULO. Use una estera para asiento del automóvil, toalla o frazada fina para proteger el tapizado. • PIEZAS DE METAL Y DE PLÁSTICO: limpiar con un jabón suave y agua fresca. No use cloro ni detergentes. • CORREAS DEL ARNÉS Y CORREAS DEL LATCH: limpie el lugar sucio. No sumerja las correas en agua. Hacerlo podría aflojar las correas. • AJUSTADOR DE LA HEBILLA Y EL ARNÉS: limpiar con un trapo húmedo.
Para sacar la funda del asiento 1. Saque las correas del arnés y para la entrepierna (vea la Sección 7.1, Eliminación del arnés, páginas 29 para obtener ayuda). 2. Quite los bucles y ganchos del asiento como se indica Ê. 3. Lave la funda a máquina en agua fría en el ciclo delicado y séquelo al aire. NO USE CLORO. 4. Para volver a poner la funda del asiento, invierta las instrucciones anteriores. Pase las correas del arnés a través de los agujeros apropiados en la funda del asiento Ë.
10.0 Piezas de repuesto Cómo hacer pedidos: Complete el formulario que sigue. El número del modelo de su asiento para automóvil DEBEN incluirse en el formulario para asegurarse que recibirá las piezas de repuesto correctas. El número del modelo puede encontrarse en una etiqueta ubicado abajo de su asiento para automóvil. Debe incluir el pago con su pedido. También se pueden solicitar las piezas del sitio web de Graco en www.gracobaby.com. Lista de piezas: . . . . . . . . . . . .
Model No. • N° de modelo (Numbers Required/Se requieren número) Total • Total: Locking clip/ Traba de seguridad Shipping & handling*: Gastos de envío*: Harness strap w/buckle tongues and harness clip /Arnés con hebilla y traba del arnés $5.00 Sales tax**: Impuestos**: Total due Total a pagar: *$15.00 outside the continental U.S. *US$ 15,00 para fuera del continente de EE.UU **CA 7.25%, IL 6.25%, IN 5%, NY 8.25%, OH 5.