Movement Sensor With Sound Monitor Tic/Alarm tt. Low Ba Micro. OWNER'S MANUAL KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed to aid in the WARNING: This product is not a toy. monitoring of your child. When using the • Do not use the Nursery Unit if: monitor, you must still provide the supervision • The adapter cords or plugs have been necessary for the continued safety of your damaged. child. This product is not designed or intended for use as a medical monitor. • The unit has been exposed to liquids.
• You may experience false alarms for several reasons. The most common reason is the Nursery Unit has not been turned off after you have removed your baby from the crib. Another reason is the Sensor Pad has not been placed under the mattress properly. Be sure the Sensor Pad is on a flat, firm surface with the turquoise side facing up. The sensitivity level may also need to be adjusted. Refer to the Movement Sensitivity Adjustment section on Pg. 11.
WARNING Modifications not authorized by the manufacturer may void users authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Features Parent Unit Power Indicator (Solid Green) Low Battery Indicator (Flashes Orange) Antenna Power Switch/Channel Selector Volume Control Sound Lights Speaker FRONT AC Adapter Jack Extra Parent Unit and adapter (On certain models) AC ADAPTER Battery Compartment BACK Nursery Unit Movement Indicator (Flashes Green) Alarm Indicator (Flashes Red) Poor Movement Indicator (Flashes Orange) Antenna Microphone Power Switch/ Channel Selector Power Indicator (Solid Green) Low Battery Indic
Installing Batteries in Parent Unit IMPORTANT: Charge the batteries for 15 hours prior to first use. Be sure to have the monitor in the OFF position during this period. Only use the AC adapters included with your monitor. Do not use these adapters with any other equipment. 1 To insert batteries, remove the battery cover on the bottom of the unit.
Installing Batteries in Nursery Unit 1 Sound & Movement The Nursery Unit requires four AAA (LR03) alkaline or rechargeable batteries (not included). Rechargeable batteries can be used but they will NOT be recharged in the Nursery Unit by plugging in the AC adapter. They will have to be removed and recharged in an external charger. Sound Only Tic Off Sens itivity Sens or Pa d Nursery Unit Model #AC201 2 To insert batteries, remove the battery cover on the back of the unit.
Setting Up Your Monitor SENSOR PAD (See figs. 1 and 2) Place the Sensor Pad under the center of the crib mattress with the blue side facing up. Do not place any loose bedding or linen between the crib mattress and the Sensor Pad. The Sensor Pad must rest on a flat, firm surface. If your crib has a spring or slat base, place a piece of Masonite board under the Sensor Pad. This support must measure at least 13 inches long on all four sides and 1/4 inch thick. (You may order a Masonite board directly from us.
Activating Units Always test your monitor before using it the first time and then on a periodic basis. Before testing your monitor, complete the setup process as described above. On the back of the Nursery Unit select one of the following three functions: • Sound & Movement: You will be able to hear your baby's sounds, see sound lights, and hear a “Tic” sound with every movement your baby makes. If no movement is detected, the “Tic” will stop and after 20 seconds the alarm will sound.
Sound & Movement NOTE: Make Sure your Sensor Pad is set up before proceeding with this section. If you haven't set up your Sensor Pad please go to Pg.8 for instructions on how to properly set up the Sensor Pad. • Sound & Movement: You will be able to hear your baby's sounds, see sound lights, and hear a “Tic” sound with every movement your baby makes. If no movement is detected, the “Tic” will stop and after 20 seconds the alarm will sound.
Special Features Movement Sensitivity Adjustment The movement sensitivity adjustment dial has been preset to level 2.5 which will suit most situations. The highest sensitivity level is 5 (most sensitive) and the lowest sensitivity level is 1 (least sensitive). You may get false alarms if your baby is in a very deep sleep or has moved to the edge of the crib.
Tips For Using Your Monitor • When the monitor is in use, do not use a crib mobile or other crib accessories that may produce vibrations. Other sources of vibrations may include fans, washing machines, loud music, etc. These sources of vibration may interfere with the performance of your Angelcare® monitor and the alarm will not sound if it continues to detect any movement. Be sure all vibration sources are eliminated before using the monitor. • There are several reasons you may experience false alarms.
Testing Your Monitor Always test your monitor before using it the first time and then on a periodic basis. Before testing your monitor, complete the set-up process as described above. 1. Testing for Sound. Turn the Nursery Unit and Parents' Unit on, making sure they are both set to the same channel. On the Nursery Unit, switch to the "Sound Only" function. Have someone else speak into the Nursery Unit or place a radio near the Nursery Unit while you take the Parents' Unit into another room.
Care and Maintenance Disconnect all units and remove all batteries before cleaning. Clean the exterior surface of the units with a soft dry or slightly damp cloth. Do not spray with cleaning products or solvents. Do not submerge in water or any other liquid. During long periods of non-use, remove all batteries from their compartments and unplug the AC adapters. Troubleshooting Problem False alarms Possible Cause Solution Baby was removed from crib and the Nursery Unit was not switched off.
Problem False alarms Alarm will not sound Possible Cause Sensor Pad cord is not connected properly to the Nursery Unit. Unplug and reconnect the cord. Nursery Unit is detecting movement when crib is being touched. Avoid contact with the crib when monitor is on. Nursery Unit is detecting movement from outside the crib such as motorized devices, strong drafts, etc. Movement Indicator Light on Nursery Unit is flashing orange (monitor is barely detecting movement).
Problem Power Indicator (green light) does not light up. There is very weak reception. There is static, distortion, interference, etc. There is feedback (squealing noises). Possible Cause Solution Batteries are low or improperly installed. Check or replace batteries. AC adapters are not connected properly or electrical outlet is out of order. Check connections or change to another electrical outlet. One of the units is not on. Make sure both units are on the same channel, either both on A or B.
Notes 17
Notes 18
Notes 19
Replacement Parts Warranty Information (USA) To purchase parts or accessories or for warranty information in the United States, please contact us at the following: Graco Children’s Products 150 Oaklands Blvd. Exton, PA 19341 www.gracobaby.com or 1-800-345-4109 Product Registration (USA) To register your Graco product from within the U.S.A. visit us online at www.gracobaby.com/productregistration We currently do not accept product registrations from those living outside the United States of America.
Detector de movimiento con monitor de sonido Tic/Alarm tt. Low Ba Micro. MANUAL DEL PROPIETARIO GUARDE LAS INSTRUCCIONES PARA USO FUTURO.
Si no observar estas advertencias y las instrucciones de armado podría resultar en lesiones serias o la muerte. Este dispositivo ha sido diseñado para ayudar a monitorizar a su niño. Cuando usa el monitor, todavía debe proporcionar la supervisión necesaria para la continua seguridad de su niño. Este producto no ha sido diseñado ni debe usarse como un monitor médico. Tenga siempre la seguridad de que el transmisor y el receptor funcionan correctamente y se encuentran a la distancia requerida.
• Cuando usa el monitor, no use el móvil de la cuna ni otros accesorios que puedan producir vibraciones. Otras fuentes de vibraciones pueden incluir ventiladores, lavarropas, música fuerte, etc. Estas fuentes de vibración pueden interferir con el rendimiento de su monitor Angelcare® y la alarma no sonará si continúa detectando movimiento que no sea el de su bebé. Tenga la seguridad de que ha eliminado todas las fuentes de vibración antes de usar el monitor.
ADVERTENCIA Las modificaciones no autorizadas por el fabricante podrían cancelar la autoridad del usuario para usar este dispositivo. NOTA: Este equipo ha sido probado y se ha determinado que cumple con los límites de un dispositivo digital Clase B, según la parte 15 de las normas de la FCC. Estos límites han sido creados para proporcionar una protección razonable contra la peligrosa interferencia en una instalación residencial.
Características Unidad para padres Indicador de encendido (verde sólido) Indicador de pilas descargadas (destella anaranjado) Antena Interruptor de encendido/selector de canales Volumen Control Luces de sonido Altavoz FRENTE Adaptador de corriente alternada Unidad extra para padres y adaptador de corriente alternada (En ciertos modelos) Enchufe del adaptador de corriente alternada Compartimiento de las pilas ATRÁS UNIDAD DEL DORMITORIO Indicador de movimiento (destella verde) Indicador de a
Cómo instalar las pilas en la unidad para padres IMPORTANTE: Cargue las pilas durante 15 horas antes de usarlas por primera vez. Asegúrese de que el monitor esté en la posición OFF (APAGADO) durante este período. Use solamente los adaptadores de corriente alternada que se incluyen con su monitor. No use estos adaptadores con ningún otro equipo. 1 Para instalar las pilas, saque la tapa de las pilas en la parte de abajo de la unidad.
Cómo instalar las pilas en la unidad del dormitorio 1 Sound & Movement La unidad del dormitorio requiere cuatro pilas alcalinas o recargables AAA (LR03) (no se incluyen). Las pilas recargables se pueden usar pero NO se recargarán en la unidad del dormitorio enchufándola en el adaptador de corriente alternada. Tendrá que sacarlas y cargarlas en un cargador externo.
Instalación de su monitor ALMOHADILLA DEL DETECTOR (Ver las figuras 1 y 2) Ponga la almohadilla del detector debajo del centro del colchón de la cuna con el lado azul mirando hacia arriba. No ponga ropa de cama suelta entre el colchón de la cuna y la almohadilla del detector. La almohadilla del detector debe estar sobre una superficie firme y plana. Si la cuna tiene una base de resortes o tablillas, ponga un pedazo de Masonite debajo de la almohadilla del detector.
Activación de las unidades Pruebe siempre su monitor antes de usarlo por primera vez y luego en forma periódica. Antes de probar su monitor, complete el proceso de programación descrito anteriormente. En la parte de atrás de la unidad del dormitorio, seleccione una de las tres funciones siguientes: • Sonido y movimiento: Podrá escuchar los sonidos de su bebé, ver luces de sonido y escuchar un sonido "tic" con cada movimiento que haga su bebé.
Sonido y movimiento NOTA: Asegúrese de que su almohadilla del detector esté programada antes de seguir con esta sección. Si no ha programado la almohadilla del detector por favor, pase a la página 8 para obtener instrucciones sobre cómo programar correctamente la almohadilla del detector. Sound & Movement • Sonido y movimiento: Podrá escuchar los sonidos de su bebé, ver luces indicadoras de sonido y escuchar un sonido "tic" con cada movimiento que haga su bebé.
Características especiales Ajuste de la sensibilidad del movimiento La perilla de ajuste de la sensibilidad del movimiento ha sido programada en el nivel 2.5 que servirá para la mayoría de las situaciones. El nivel de sensibilidad más alto es 5 (más sensible) y el nivel de sensibilidad más bajo es 1 (menos sensible). Usted puede obtener falsas alarmas si su bebé está profundamente dormido o se ha movido al borde de la cuna.
Sugerencias para el uso del monitor • Cuando usa el monitor, no use el móvil de la cuna ni otros accesorios que puedan producir vibraciones. Otras fuentes de vibraciones pueden incluir ventiladores, lavadoras de ropa, música fuerte, etc. Estas fuentes de vibración podrían interferir con el funcionamiento de su monitor Angelcare® y la alarma no sonará si continúa detectando cualquier movimiento. Tenga la seguridad de eliminar todas las fuentes de vibración antes de usar el monitor.
Cómo probar su monitor Pruebe siempre su monitor antes de usarlo por primera vez y luego en forma periódica. Antes de probar su monitor, complete el proceso de programación descrito anteriormente. 1. Cómo probar el sonido. Encienda la unidad del dormitorio y la unidad para padres, asegurándose de que estén programadas en el mismo canal. Encienda la función “Sound Only” (sonido solamente) en la unidad del dormitorio.
Atención y mantenimiento Desconecte todas las unidades y saque todas las pilas antes de la limpieza. Limpie el exterior de las unidades con un trapo suave y seco o apenas húmedo. No rocíe productos limpiadores o solventes. No la sumerja en agua u otro líquido.
Problema Falsas alarmas No suena la alarma La luz indicadora del movimiento en la unidad del dormitorio destella anaranjada (el monitor apenas detecta el movimiento). No se transmite ningún sonido. Causa posible El cordón de la almohadilla del detector no está conectado correctamente a la unidad del dormitorio. La unidad del dormitorio detecta el movimiento cuando toca la cuna. Solución Desenchufe y vuelva a conectar el cordón. Evite el contacto con la cuna cuando el monitor está activado.
Problema No se transmite ningún sonido. Causa posible Los adaptadores de corriente alternada no están conectados correctamente o el tomacorriente no está energizado. Verifique las conexiones o cambie a otro tomacorriente. Una de las unidades no está encendida. Asegúrese de que ambas unidades estén encendidas. Asegúrese de que ambas unidades estén programadas en el mismo canal, sea las dos en A o las dos en B. Las unidades están programadas en diferentes canales.
Notas 17
Notas 18
Notas 19
Información sobre la garantía y las piezas de repuesto (EE.UU.) Para comprar piezas o accesorios o para obtener información sobre la garantía en los Estados Unidos, por favor comuníquese con nosotros en: Graco Children’s Products 150 Oaklands Blvd. Exton, PA 19341 www.gracobaby.com o 1-800-345-4109 Registro del producto (EE.UU.) Para registrar su producto Graco desde dentro de los EE.UU., visítenos en línea en www.gracobaby.