User's Manual

High volume output at high pressures for the most demanding applications

• Combine with GL-1s and GL-32s in the same Single Line Parallel System to provide a full range of outputs

• Outperforms the competition–tested to over 250,000 cycles without failure!

• Bolt-on compatible with Lincoln

Centro-Matic SL-11

injectors

GL-11 Injector

Automatic Lubrication System

Outperforms

the Competition

PAGE 1
GL-11 Injector Automatic Lubrication System Outperforms the Competiti o n High volume output at high pressures for the most demanding applications • Combine with GL-1s and GL-32s in the same Single Line Parallel System to provide a full range of outputs • Outperforms the competition–tested to over 250,000 cycles without failure! • Bolt-on compatible with Lincoln® Centro-Matic SL-11® injectors
PAGE 2
Precision-honed Components for Reliable Operation in the Harshest Environments Easy Hex Nut Volume Adjustment System Setup Tips Visual Indicator Pin • Run branches off main line and “Tee Out” to banks of injectors instead of in-series • Locate injectors as close to bearings as possible to minimize line length to bearing to enable max pressure to reach injectors • Place pressure switch beyond last injector • Use large diameter tubing (1/4 in.