GPSMAP 78 series ® quick start manual for use with the GPSMAP 78, GPSMAP 78s, and GPSMAP 78sc
Getting Started ‹ warning See the Important Safety and Product Information guide in the product box for product warnings and other important information When using your device the first time, you should complete the following tasks to set up the device and get to know the basic features. 1. 2. 3. 4. 5. 6. Install the batteries (page 2). Turn on the device (page 3). Acquire satellites (page 3). Mark a waypoint (page 5). Calibrate the compass (page 7). Navigate with the search menu (page 8). 7.
2. Insert the batteries, observing polarity. Acquiring Satellite Signals It may take 30 to 60 seconds to acquire signals. 3. Replace the battery cover. For best results, after you install new batteries, update the battery type in the system settings (page 10). Turning the Device On or Off Press and hold . Setting Your Language 1. Turn on the unit. 2. Use the Rocker to select a language. GPSMAP 78 Quick Start Manual 1. Go outdoors to an open area. 2. If necessary, turn on the device. 3.
Buttons FIND/MOB Press FIND to open the search menu. Press and hold MOB (man overboard function) to store your current location as a waypoint and begin navigation to that point. Press and hold to turn the device on and off. Quickly press to open the backlight status page. QUIT Press QUIT to cancel or return to the previous menu or page. PAGE Press PAGE to scroll through the main pages (page 5). MENU Press MENU to open the options menu for the page that is currently open.
Waypoints 2. Select a waypoint. 3. Press Menu. 4. Select Delete. Creating Waypoints 1. From any page, press and hold MARK. 2. Select Done. Main Pages Waypoints are locations you record and store in the device. Editing a Waypoint Before you can edit a waypoint, you must create a waypoint. 1. From the main menu, select Waypoint Manager. 2. Select a waypoint. 3. Select an attribute (such as the name or location). 4. Enter the new information. 5. Select Done.
Changing the Map Orientation 1. From the map, press MENU. 2. Select Setup Map > Orientation. 3. Select an orientation: • Select North Up to show north at the top of the page. • Select Track Up to show your current direction of travel at the top of the page. • Select Automotive Mode to show a perspective view. Measuring Distance You can move the cursor around the map to measure distance from the current location. 1. From the map, press MENU. 2. Select Measure Distance.
Calibrating the Compass notice Calibrate the electronic compass outdoors. Do not stand near objects that influence magnetic fields, such as cars, buildings, or overhead power lines. note: The three-axis compass is available only with the GPSMAP 78s and GPSMAP 78sc. You should calibrate the compass after moving long distances, experiencing temperature changes, or changing the batteries. 1. From the compass, press MENU. 2. Select Calibrate Compass > Start. 3. Follow the on-screen instructions.
Customizing Data Fields You can customize the data fields displayed on each main page. For data field descriptions, see the GPSMAP 78 Owner’s Manual. 1. 2. 3. 4. 5. From a main page, press meNu. Select Change Data Fields. Select a data field. Press enter. Follow the on-screen instructions. About Tracks Your Garmin device records a track log while you are moving. You can save these tracks and navigate to them later.
Creating a Route 1. From the main menu, select Route Planner > Create Route > Select First Point. 2. Select a category. 3. Select the first point in the route. 4. Select Use. 5. Select Select Next Point. 6. Repeat steps 2–5 until the route is complete. A route must contain at least two points. 7. Press quit to save the route. Navigating a Route 1. 2. 3. 4. Press FIND. Select Routes. Select a route. Select Go.
Attaching the Wrist Strap 1. Place the loop of the wrist strap through the slot opening at the bottom of the device. 2. Route the strap through the loop and pull it tight. Maximizing Battery Life Using the Battery Save Option Use the battery save option to save battery power and prolong battery life. From the main menu, select Setup > Display > Battery Save > On. Decreasing the Backlight Extensive use of screen backlighting can significantly reduce battery life.
Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Resetting the Device If your GPSMAP 78 screen or buttons stop responding, you can reset the device. 1. Remove the batteries. 2. Reinstall the batteries (page 2). note: This does not erase any of your data or settings. Updating the Software 1. Go to www.garmin.com /products/webupdater. 2.
Garmin®, the Garmin logo, and GPSMAP ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin. Other trademarks and trade names are those of their respective owners. For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc.
