Injecto-Flo® II
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR OIL AND FLUID GREASE Distributor for Oil group 3400 0.01 0.03 0.06 0.1 0.16 3500 0.1 0.2 0.4 0.6 3900 0.2 0.4 0.6 1.0 1.5 Distributor for fluid grease group FUNCTION Quantity cm³ Quantity cm³ 3410 0.01 0.03 0.06 0.1 3510 0.1 0.2 0.3 3910 0.1 0.2 0.3 Piston distributors meter out and distribute the lubricant delivered by an intermittently actuated pump.
L12121 Trabon® Injecto-Flo® II SINGLE-LINE LUBRICATION SYSTEM WITH PISTON DISTRIBUTOR FOR OIL OR FLUID GREASE FUNCTION INSTALLATION LAYOUT A pump feeds the lubricant through the main line to the piston distributors. From there it is directed to the lube points in precisely metered quantities. This takes place in a time- or pulse-controlled sequence.
L12121 Trabon® Injecto-Flo® II PUMP SPECIFICATIONS 110 Ø9 110 35 92 40 20 60 P 339.5 15 M14x1.5 Ø8 182 2.5 35 187.5 67.5 128 270 290 175 Pump Specs 564138 (513-001-200) 122591– (513-002-201) Lubricants Oil 50-1000 cSt Fluid Grease NLGI 000,00 3 Output 0.5 L/min (30 in /min) 0.2 L/min (12 in3/min) Pressure 25 bar (360 psi) 40 bar (580 psi) Reservoir Capacity 6 Liter (1.6 gallon) plastic Voltage, Current 230/400 VAC 50 Hz, 0.66 A /0.38A 276/480 VAC 60 Hz, 0.75A /0.
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR OIL GROUP 3200 0.01 – 0.16 CM³ ORDER KEY: 320 - X - X - Number of Outlets 2 - Two 3 - Three 5 - Five tube 4 Metering Metering Marking 0 - 0 cm3 - outlet closed 1 - 0.01 cm3 2 - 0.03 cm3 3 - 0.06 cm3 4 - 0.10 cm3 5 - 0.16 cm3 Inlet Thread D1 washer B - M10x1 C - M14x1.5 Order Example: Distributor group: 3200 with 3 outlets key: 3 marking from the left to the right: 0.06 - 0.10 - 0.
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR OIL ORDER KEY: GROUP 3400 0.01 – 0.16 CM³ 3400 - X - X Number of Outlets PISTON DISTRIBUTOR 1-PORT No. 3400-1X 1 - One 2 - Two 3 - Three 5 - Five Metering 0 - 0 cm3 - outlet closed 1 - 0.01 cm3 2 - 0.03 cm3 3 - 0.06 cm3 4 - 0.10 cm3 5 - 0.16 cm3 PISTON DISTRIBUTOR 2-PORT NO. 3400-2XX Metering Nipple Part No. Old Part No. .03 cc 558311 513-000-021 .06 cc 558312 513-000-022 .10 cc 558313 513-000-023 .
L12121 Trabon® Injecto-Flo® II ORDER KEY: PISTON DISTRIBUTOR FOR OIL GROUP 3500 0.10 – 0.60 CM³ 3500 - X - X Number of Outlets PISTON DISTRIBUTOR 1-PORT NO. 3500-1X 1 - One 2 - Two 3 - Three 5 - Five Metering 0 - 0 cm3 - outlet closed 4 - 0.10 cm3 5 - 0.20 cm3 6 - 0.40 cm3 7 - 0.60 cm3 PISTON DISTRIBUTOR 2-PORT NO. 3500-2XX Metering Nipple Part No. Old Part No. .10 cc 558315 513-000-030 .20 cc 558316 513-000-031 .40 cc 558317 513-000-032 .
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR OIL ORDER KEY: GROUP 3900 0.20 – 1.50 CM³ 3500 - X - X Number of Outlets 1 - One 2 - Two 3 - Three PISTON DISTRIBUTOR 1-PORT NO. 3900-1X Metering 0 - 0 cm3 - outlet closed 5 - 0.20 cm3 6 - 0.40 cm3 7 - 0.60 cm3 8 - 1.00 cm3 9 - 1.50 cm3 Metering Nipple Part No. Old Part No. .20 cc 558319 513-000-040 .40 cc 558320 513-000-041 .60 cc 558321 513-000-042 1.00 cc 558322 513-000-043 1.
L12121 Trabon® Injecto-Flo® II ORDER KEY: PISTON DISTRIBUTOR FOR FLUID GREASE NLGI 000, 00 3500 - GROUP 3410 0.01 – 0.10 CM³ X - X Number of Outlets PISTON DISTRIBUTOR 1-PORT NO. 3410-1X 1 - One 2 - Two 3 - Three 5 - Five Metering 0 - 0 cm3 - outlet closed 1 - 0.01 cm3 2 - 0.03 cm3 3 - 0.06 cm3 4 - 0.10 cm3 PISTON DISTRIBUTOR 2-PORT NO. 3410-2XX Metering Nipple Part No. Old Part No. .03 cc 558324 513-000-051 .06 cc 558325 513-000-052 .
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR FLUID GREASE NLGI 000,00 ORDER KEY: 3500 - GROUP 3510 0.10 – 0.30 CM³ X - X Number of Outlets PISTON DISTRIBUTOR 1-PORT NO. 3510-1X 1 - One 2 - Two 3 - Three 5 - Five Metering 0 - 0 cm3 - outlet closed 4 - 0.10 cm3 5 - 0.20 cm3 6 - 0.30 cm3 PISTON DISTRIBUTOR 2-PORT NO. 3510-2XX Metering Nipple Part No. Old Part No. .10 cc 558327 513-000-060 .20 cc 558328 513-000-061 .
L12121 Trabon® Injecto-Flo® II PISTON DISTRIBUTOR FOR FLUID GREASE NLGI 000,00,0 ORDER KEY: 3500 - GROUP 3910 0.10 – 0.30 CM³ X - X Number of Outlets PISTON DISTRIBUTOR 1-PORT NO. 3910-1X 1 - One 2 - Two 3 - Three Metering 0 - 0 cm3 - outlet closed 4 - 0.10 cm3 5 - 0.20 cm3 6 - 0.30 cm3 Metering Nipple Part No. Old Part No. .10 cc 558330 513-000-070 .20 cc 558331 513-000-071 .
L12121 Trabon® Injecto-Flo® II Oil Pump - 3L Reservoir (no control) Part No. Reservoir Size (L) Flow (lpm) Level Switch Refill Style 122545 3 0.2 None Screw cap 122546 3 0.2 None Straight Connector (10mm pipe) 122547 3 0.5 None Screw cap 122548 3 0.5 None Straight Connector (10mm pipe) 122549 3 0.2 Single w/DIN Screw cap 122550 3 0.2 Single w/DIN Straight Connector (10mm pipe) 122551 3 0.5 Single w/DIN Screw cap 122552 3 0.
L12121 Trabon® Injecto-Flo® II Fluid Grease Pump - 3L reservoir (no control) Part No. Reservoir Size (L) Flow (lpm) Level Switch Refill Style 122581 3 0.2 None Screw Cap 563301 3 0.2 None Straight Connector (10mm pipe) 122582 3 0.2 Single w/DIN Screw Cap 122583 3 0.2 Single w/DIN Straight Connector (10mm pipe) 122584 3 0.2 Single w/M12 Top Screw Cap 122585 3 0.2 Single w/M12 Top Straight Connector (10mm pipe) 122586 3 0.2 Dual w/ DIN Screw Cap 122587 3 0.
L12121 Trabon® Injecto-Flo® II 3400 Single Point Piston Distributors - Oil 3 3510 Single Point Piston Distributors - Grease (continued) 558306 0.01 cm M8x1 122817 0.1 cm3 M12x1 558307 0.03 cm3 M8x1 122818 0.2 cm3 M12x1 0.3 cm3 M12x1 3 558308 0.06 cm M8x1 122819 558309 0.10 cm3 M8x1 3910 Single Point Piston Distributors - Grease 558310 0.16 cm3 M8x1 121670 0.1 cm3 M14x1.5 122804 0.01 cm3 M10x1 121671 0.2 cm3 M14x1.5 122805 0.03 cm3 M10x1 121672 0.3 cm3 M14x1.5 122806 3 0.
L12121 Trabon® Injecto-Flo® II 3500/3510 Series Bar Manifolds (continued) 3400/3410 Cast Manifolds 15X696 M14/M10 - 7 Port 122841 2 Outlets, Oil PD, Red Plastic Cover 15X697 M14/M10 - 8 Port 122861 3 Outlets, Oil PD, Red Plastic Cover 15X698 M14/M10 - 10 Port 122862 5 Outlets, Oil PD, Red Plastic Cover 3900/3910 Series Bar Manifolds 122863 2 Outlets, Grease PD, White Plastic Cover 15X626 Tee M14/M14 - 1 Port 122864 3 Outlets, Grease PD, White Plastic Cover 15X699 M14/M14 - 2 Port 122
Look to Graco Inc. for all your Centralized Lubrication System needs. Bulletins Description Bulletin Injecto-Flo Oil Pumps AO-1 Air Operated Pumps EO-1 Electric Pumps EO-3 Electric Pumps L12601 L12605 L12606 Consult Graco Factory for availability of Electrical Pumps for automotive specifications. Bulletins Description Bulletin LubriSystem LubriSystem Pumps L12100 Note: LubriSystem pumps can also be used with oil or fluid grease.
