Car Seat/Booster Seat Owner’s Manual READ THIS MANUAL. Do not install or use this car seat until you read and understand the instructions in this manual. FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Table of Contents 1.0 Warnings to Parents and Other Users . . . . . .3 2.0 Registration Information . . . . . . . . . . . . . . . . .4 2.1 Register Your Car Seat . . . . . . . . . . . . . . . .4 2.2 Recall Information . . . . . . . . . . . . . . . . . . . .4 2.3 If You Need Help . . . . . . . . . . . . . . . . . . . .4 3.0 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Important Information . . . . . . . . . . . . . . . . .7-10 4.1 Warnings . . . . . . . . . . . . . . . . . . . . .
1.0 Warnings to Parents and Other Users Failure to properly use this car seat increases the risk of serious injury or death in a sharp turn, sudden stop or crash. Your child’s safety depends on you installing and using this car seat correctly. Even if using this car seat seems easy to figure out on your own, it is very important to READ THE OWNER’S MANUAL and the vehicle owner’s manual. Your child’s safety depends on: 1. Choosing the correct mode of use for the car seat depending on your child’s size. 2.
2.0 Registration Information Model Number: Manufactured in: Purchase Date: 2.1 Register Your Car Seat Please fill in the above information. The model number can be found on a label underneath your car seat. Fill out the prepaid registration postcard attached to the seat cover and mail it today. Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address and model number to: Graco Children’s Products Inc. 150 Oaklands Blvd.
3.
Locking clip storage* Junction plate storage Adjustment belt LATCH & Tether Storage bars LATCH*** Tether strap** LATCH Connector Metal junction plate Owner’s manual storage compartment — Tether clip Expiration date *The locking clip is stored on the back of the car seat. You will need to use it with certain types of vehicle seat belts. **Vehicles are now (or can be) equipped with tether anchor points behind some seats. A tether anchors the top of the car seat to the body of the vehicle.
4.0 Important Information 4.1 Warnings • DO NOT INSTALL OR USE THIS CAR SEAT UNTIL YOU READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL AND IN YOUR VEHICLE OWNER’S MANUAL. DO NOT let others install or use the car seat unless they understand how to use it. • FAILURE TO PROPERLY USE THIS CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN A SHARP TURN, SUDDEN STOP OR CRASH. Your child can be injured in a vehicle even if you are not in a crash.
• NEVER LEAVE YOUR CHILD UNATTENDED. • NEVER LEAVE A CAR SEAT UNSECURED IN YOUR VEHICLE. An unsecured car seat can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely belted in the vehicle. If not using LATCH, make sure LATCH connectors are properly stored on back of seat. • REPLACE THE CAR SEAT AFTER AN ACCIDENT OF ANY KIND. An accident can cause damage to the car seat that you cannot see.
4.2 Height and Weight Limitations FAILURE TO USE CAR SEAT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE RISK OF SERIOUS INJURY OR DEATH. Instructions for the use of this car seat and your vehicle’s seat belt differ greatly depending on the size of your child. Be sure you are using the car seat in the correct mode and with the correct features for your child.
4.2.1 WITH Built in Harness Your child MUST meet all requirements: • WEIGHT: 20 to 40 lbs (9 to 18 kg) • HEIGHT: 27 to 43 inches (69 to 109 cm) • At least one year old and can sit upright unassisted • Shoulders are BELOW top harness slots. If shoulders are above top harness slots, child is too large for built-in harness.
5.0 Car Seat Location 5.1 Vehicle Seat Requirements IMPROPER PLACEMENT OF THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH. Some seating positions in your vehicle may not be safe for this car seat. Some vehicles do not have any seating positions that can be used safely with the car seat. If you are not sure where to place the car seat in your vehicle, consult your vehicle owner’s manual or call Graco Children's Products Inc., 1-800-345-4109.
5.2 Vehicle Seat Belt Requirements MANY SEAT BELT SYSTEMS ARE NOT SAFE TO USE WITH THE CAR SEAT. THE VEHICLE SEAT BELT MUST BE DESIGNED TO HOLD THE CAR SEAT TIGHTLY AT ALL TIMES. Pay careful attention to these systems; some of the seat belts that are not safe to use look very much like seat belts that are safe to use. If you are unsure, consult your vehicle owner’s manual or call Graco Children's Products Inc., 1-800-345-4109. 5.2.
• Combination Lap/Shoulder Belt with Retractor Each strap has a retractor at one end and is attached to the latch plate at the other end. • Passive Restraint Lap or Shoulder Belt Mounted on Door • Passive Restraint Lap Belt with Motorized Shoulder Belt DO NOT use vehicle belts that are attached to the door in any way or that move along a track to automatically surround the passenger when the door is closed.
5.2.2 SAFE Vehicle Belt Systems THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR CAR SEAT, IF the seat location meets all other requirements of these instructions and those in your vehicle owner's manual. LATCH can be used in place of the following vehicle belt systems if your vehicle is equipped with LATCH anchor points. Please refer to vehicle owners manual for LATCH locations.
With OR Without Built-in Harness • Combination Lap/Shoulder Belt with Locking Latch Plate Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the car seat. • Combination Lap/Shoulder Belt with Sliding Latch Plate This belt has a latchplate that slides freely along the belt.
To Install Locking Clip: 1. Tighten the buckled belt by pushing down hard on the car seat and pulling hard on the shoulder belt. 2. While pushing down on seat, pinch the two straps together behind the buckle tongue. Unbuckle the belt without allowing it to slip. 3. Connect lap and shoulder belts as shown . 4. Rebuckle belt. Check that lap belt does not move by pulling hard. If belt loosens or lengthens, repeat procedure. Remove locking clip when not using car seat. Store under it’s tab on the back of seat.
With LATCH Newer vehicles have one or more seating positions with LATCH anchorage systems. If vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at the vehicle seat crease. If not visible, they may be marked with the symbol below . See your vehicle owner’s manual for exact locations, anchor identification, and requirements for use with a car seat. Typical seat in a passenger vehicle. Other vehicle types may have different LATCH locations.
6.0 Using Car Seat WITH Built-in Harness 6.1 Positioning the Harness Straps FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Snugly adjust the belts provided with this child restraint around your child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position. 1.
4. Check the crotch strap. Choose the position that is closest to but not under your child. To move the strap: Reach under seat and push the metal retainer up through the slot sideways . Place the retainer in the appropriate slot. Pull on buckle to make sure it is secure. 5. The harness straps must go into the slots even with or just above the shoulders . 6. If straps are in the proper slots, go to step 11 on page 21. 7. To adjust harness straps: Remove straps from metal junction plate .
8. Pull strap ends through slots and reinsert them in the correct slots as determined in step 5, page 19. 9. Reassemble straps onto metal junction plate exactly as shown . Check that straps are completely within the slots. 10. Check that the straps are inserted at the same level and that they are not twisted. Pull on harness to make sure it is secure.
11. Harness Adjustment Loosen the harness straps by fully pushing in the red adjustment button on the front of the seat and pulling the straps out at the shoulders as shown . (See also Section 6.3, Securing Your Child in the Car Seat, page 26.) REMEMBER to check the shoulder and crotch straps as your child grows and move them to the next position when necessary.
6.2 Securing the Car Seat in Your Vehicle FAILURE TO PROPERLY SECURE THE CAR SEAT IN THE VEHICLE INCREASES THE CHILD’S RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle owner’s manual to be sure your car seat is properly located, positioned, and held tightly at all times. 6.2.1 With a Vehicle Lap or Lap/Shoulder Belt: Store LATCH. See Section 8.2, Storing LATCH, page 32. 1.
4. Tighten vehicle seat belt Push down hard with your knee or free hand in the middle of the car seat . Then pull and tighten the vehicle belt. For more information on how to tighten the belt for your seat belt system, see Section 5.2 Vehicle Seat Belt Requirements, pp. 12-17, or your vehicle owner’s manual. 5. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31. When not using the tether, hook it on the tether storage bar on the back of the seat. 6.
6.2.2 With LATCH 1. For ease of installation, extend LATCH to its maximum length. 2. Place the car seat firmly against the back of a forward-facing vehicle seat. 3. Thread LATCH through the belt path normally used for the vehicle seat belt . Belt must lay flat and not be twisted. 4. Hook LATCH Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached . 5. Tighten LATCH by pushing down hard on car seat and pulling the adjustment belt . 6.
7. All LATCH seating positions have tether anchors. Secure the top of the seat using the tether strap. See Section 8.1 Using the Tether, page 31. When not using the tether, hook it on the tether storage bar on the back of the seat. 8. Safety Check for Secure Installation Perform this test every time you drive with your child. Twist and pull car seat front to back and left to right to check that seat is secure . LATCH belt must stay tight. Car seat must be very tight.
6.3 Securing Your Child in the Car Seat FAILURE TO PROPERLY SECURE YOUR CHILD IN THE CAR SEAT INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. In a crash, the car seat provides NO protection for your child unless the harness straps are properly secured. Follow these instructions carefully to properly secure your child. • ADJUST THE HARNESS SYSTEM SNUGLY EVERY TIME you place your child in the car seat. • Avoid bulky clothing. 1.
3. Pull the adjustment strap to securely tighten the harness . 4. Fasten harness clip . Position harness clip at middle of child’s chest, level with armpits. 5. Make sure straps are flat and tight against child’s shoulders. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position .
7.0 Using Car Seat WITHOUT Built-in Harness FAILURE TO PROPERLY SECURE YOUR CHILD AND THE BOOSTER SEAT IN YOUR VEHICLE INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. You must always use a vehicle lap/shoulder belt to secure your child and the booster seat. LATCH will not secure your child in the booster seat. Use only the vehicle’s lap and shoulder belt system when restraining the child in this booster seat .
7.1 Harness Removal 1. Remove harness straps from metal junction plate. See figure 5 on page 19 for more help. Pull the straps through harness slots. Do not remove buckles or harness clip from straps . Push straps, buckles and harness clip through bottom of seat. 2. Remove crotch strap. See figure 3 on page 19 for more help. Buckle crotch strap to harness and fasten harness clip together for storage. 3. Metal junction plate and strap are not removable.
7.2 Securing Child and Booster Seat in Vehicle 1. Place car seat firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt only. 2. If you want to use tether to hold seat in place, secure it now. See Section 8.1 Using the Tether, page 31. 3. Place child in car seat with child’s back flat against back of car seat. 4. Position lap/shoulder belt as shown . Fasten buckle and pull up on the shoulder belt to tighten. 5.
8.0 Additional information 8.1 Using the Tether All LATCH seating positions have tether anchors. If you want to use the tether, check your vehicle owner’s manual for the location(s). If your vehicle is not equipped with a tether anchor, it may be possible to install one. Contact your vehicle dealership for the proper anchor location and installation. You may purchase a tether anchor parts kit by calling Graco Customer Service at 1-800-345-4109. 1. Check that tether is securely attached to car seat. 2.
8.2 Storing LATCH 1. For ease of storing, extend LATCH to its maximum length. 2. Locate the storage bars on back of car seat . 3. Fasten ends of LATCH onto storage bars as shown. 4. After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened. 5. LATCH storage should look like this when complete . Storage bars 8.3 Airplane Use This restraint is certified for use in Motor Vehicles. It is certified for use in Aircraft ONLY when used with the built-in harness.
8.4 Accessories (on certain models) Never place sharp or pointed objects in a cupholder. In a crash, these objects could hit your child and cause serious injuries. 1. Insert the two prongs of the cupholder into the two slots on either the left or right side of the seat . 2. Push cupholder down until the clip snaps onto the bottom of seat . CHECK that cupholder is secure by pulling on it.
8.5 Using Recline Foot (on certain models) Some models come with a recline foot on the bottom of the seat. 1. To use recline: flip foot to front of seat. . 2. For storage: flip foot toward rear of seat.
9.0 Care and Maintenance • CONTINUOUS USE OF CAR SEAT MAY CAUSE DAMAGE TO VEHICLE SEAT. Use a car seat mat, towel or thin blanket to protect upholstery. • METAL AND PLASTIC PARTS: clean with mild soap and cool water. NO BLEACH OR DETERGENTS. • HARNESS STRAPS AND LATCH STRAPS: spot clean or replace. Do not immerse the straps in water. Doing so may weaken the straps. • BUCKLE AND HARNESS ADJUSTER: clean with a damp cloth. • NEVER LUBRICATE THE BUCKLE.
To Remove Seat Cover 1. Remove harness and crotch straps (see Section 7.1, Harness Removal, page 29 for help). 2. Remove elastic loops and hooks from seat as shown . 3. Under the front of the seat push in the tab to remove the adjustment button plate . 4. Turn adjustment plate sideways and work it through the hole in the seat cover . It will be a tight fit so be careful not to tear the seat cover. 5. Lift cover off seat, pushing harness straps, crotch strap and hardware through slots in cover.
To Reinstall Seat Cover 1. To put the seat cover back on, reverse preceding instructions. Push the adjustment plate and strap through the hole in the seat cover. Be careful not to tear the seat cover. 2. Insert the two fingers of the adjustment plate into the back of the hole in the seat . 3. Push the fabric up so that the tab under the adjustment plate is under the cloth . Snap the adjustment plate back on the seat .
4. Thread the harness straps through the appropriate holes in the seat cover. See the illustration at right and section 6.1, “Positioning the Harness Straps” page 18 to properly secure the harness straps back on the seat . 5. Secure the seat cover to the seat by reattaching the elastic loops and hooks to the seat.
Notes 39
10.0 Replacement Parts How to Order: Complete the form that follows. Your car seat model number MUST be included on the form to ensure proper replacement parts. Your model number can be found on a sticker on the underside of your car seat. Payment must accompany your order. Parts may also be ordered from Graco’s web site at www.gracobaby.com. Parts List: Price:* Locking clip . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.00 Harness strap with buckle tongues and harness clip . . . . . . . . . .
Model No. (Number Required) Subtotal: Locking clip Harness strap with buckle tongues and harness clip Seat cover Crotch strap w/buckle Tether strap Harness Clip Cupholder Mesh holder LATCH Shipping & handling*: $5.00 Sales tax**: Total: * $15.00 outside the continental U.S. **CA 7.25%, IL 6.25%, IN 5%, NY 8.25%, OH 5.75%, PA 6%, SC 5% Check or money order enclosed (payable to Graco Children’s Products Inc.
Keep this manual in the storage compartment on the back of the car seat.
Asiento para automóvil/ asiento para niños Manual del propietario LEA ESTE MANUAL. No instale ni use este asiento para automóvil hasta que haya leído y entendido las instrucciones en este manual.
Índice de materias 1.0 Advertencias a padres y otros usuarios . . . . . . . . . . .3 2.0 Información sobre el registro . . . . . . . . . . . . . . . . . . . .4 2.1 Registre su asiento para automóvil . . . . . . . . . . . . .4 2.2 Información sobre el retiro de productos del mercado .4 2.3 Si necesita ayuda . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.0 Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 4.0 Información importante . . . . . . . . . . . . . . . . . . . . .
1.0 Advertencias a padres y otros usuarios No usar debidamente este asiento para automóvil aumenta el riesgo de lesiones serias o muerte en una curva cerrada, parada repentina o accidente. La seguridad de su niño depende de que usted instale y use este asiento para automóvil correctamente. A pesar de que el uso de este asiento para automóvil parezca fácil de descifrar, es muy importante LEER EL MANUAL DEL PROPIETARIO y el manual del usuario del vehículo. La seguridad de su niño depende de: 1.
2.0 Información sobre el registro Número de modelo: Fabricado en: Fecha de compra: 2.1 Registre su asiento para automóvil Por favor, complete la información que se solicita más arriba. El número de modelo pueden encontrarse en una etiqueta ubicada debajo del asiento para automóvil. Llena la tarjeta postal de registro prepagada que se encuentra en la tapa del asiento y envíela hoy mismo. Los dispositivos de seguridad para niños podrán ser retirados del mercado por problemas de seguridad.
2.3 Si necesita ayuda Por favor, comuníquese con el Departamento de Servicio al Cliente con cualquier pregunta que pudiera tener sobre piezas, uso o mantenimiento. Cuando se ponga en contacto con nosotros, por favor tenga listo el número de modelo de su producto para que lo podamos ayudar más eficientemente. Estos números pueden encontrarse en una etiqueta ubicada abajo del asiento para automóvil. 1-800-345-4109 o www.gracobebe.com 3.
Almacenamiento de la traba de seguridad* Almacenaje para la placa de unión Cinturón de ajuste Barras de almacenamiento del LATCH y la soga LATCH*** Correa de la soga** Conector del LATCH Placa de unión metálica Compartimiento de almacenamiento del manual del propietario Traba de la soga — Fecha de vencimiento *La traba de seguridad se guarda en el respaldo del asiento para automóvil. Necesitará usarlo con ciertos tipos de cinturones de seguridad de automóviles.
4.0 Información importante 4.1 Advertencias • NO INSTALE NI USE ESTE ASIENTO PARA AUTOMÓVIL HASTA QUE HAYA LEÍDO Y ENTENDIDO LAS INSTRUCCIONES EN ESTE MANUAL Y EN EL MANUAL DEL PROPIETARIO DE SU VEHÍCULO. NO deje que otros instalen o usen el asiento del automóvil a menos que entiendan cómo usarlo. • NO USAR DEBIDAMENTE ESTE ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE.
• Según las estadísticas de accidentes, LOS NIÑOS ESTÁN MÁS SEGUROS CUANDO ESTÁN DEBIDAMENTE SUJETADOS EN LOS ASIENTOS TRASEROS DEL VEHÍCULO EN LUGAR DE A LOS ASIENTOS DELANTEROS. En el caso de un vehículo con una bolsa de aire para el pasajero delantero, consulte el manual del propietario de su vehículo así como estas instrucciones para la instalación del asiento para automóvil. • NUNCA DEJE A SU NIÑO SIN ATENDER. • NUNCA DEJE UN ASIENTO SIN SUJETAR EN SU VEHÍCULO.
• ESTE SISTEMA PARA NIÑOS CUMPLE con todas las Normas Federales de Seguridad para Vehículos Automotor y ha sido certificado para el uso en vehículos automotor. Ha sido certificado para uso en aeronaves solamente cuando se lo usa con el arnés incorporado. Cuando se lo usa como asiento para niños sin el arnés, este sistema no ha sido certificado para ser usado en aeronaves. • NUNCA ENTREGUE ESTE ASIENTO PARA AUTOMÓVIL a otra persona sin entregarles este manual.
4.2.1 CON el arnés incorporado Su niño DEBE CUMPLIR todos los requisitos: • PESO: 20 a 40 libras (9 a 18 kg) • ALTURA: 27 a 43 pulgadas (69 a 109 cm) • Por lo menos debe tener un año de edad y debe poder sentarse sin ayuda • Los hombros están DEBAJO de las ranuras superiores del arnés. Si los hombros están por encima de las ranuras superiores del arnés, el niño es demasiado grande para usar el arnés incorporado.
5.0 Ubicación del asiento para automóvil 5.1 Requisitos del asiento del vehículo UNA COLOCACIÓN INADECUADA DEL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE SUFRIR UNA LESIÓN SERIA O LA MUERTE. Algunas posiciones de sentado en su vehículo podrían no ser seguras para este asiento para automóvil. Algunos vehículos no tienen posiciones de sentado que puedan usarse seguramente con el asiento para automóvil.
5.2 Requisitos del cinturón de seguridad del vehículo MUCHOS SISTEMAS DE CINTURONES PARA SEGURIDAD NO SON SEGUROS CUANDO SE LOS USA CON EL ASIENTO PARA AUTOMÓVIL. EL CINTURÓN DE SEGURIDAD DEL VEHÍCULO DEBE HABER SIDO DISEÑADO PARA MANTENER EL ASIENTO PARA AUTOMÓVIL APRETADAMENTE EN TODO MOMENTO. Preste mucha atención a estos sistemas ya que muchos de los sistemas de cinturones de seguridad que no son seguros parecen iguales a los que son seguros.
• Combinación de cinturón para el hombro y de regazo con retractor Cada correa tiene un retractor en una punta y está conectada a la placa de seguridad en la otra punta. • Cinturón pasivo Cinturón para el hombro o de regazo montado en la puerta • Cinturón pasivo Cinturón de regazo con cinturón para el hombro motorizado NO use los cinturones del vehículo que estén conectados a la puerta de manera alguna o que se muevan a través de un carril para rodear automáticamente al pasajero cuando se cierra la puerta.
5.2.2 Sistemas SEGUROS de cinturones de vehículos LOS SIGUIENTES SISTEMAS DE CINTURONES PUEDEN USARSE CON SU ASIENTO PARA AUTOMÓVIL, SI la ubicación del asiento cumple todos los otros requisitos de estas instrucciones y las del manual del propietario del vehículo. El LATCH puede usarse en lugar de los siguientes sistemas de seguridad del vehículo si su vehículo está equipado con puntos de anclaje LATCH.
Con O sin el arnés incorporado • Combinación cinturón para el hombro/de regazo con placa de seguridad con traba Una vez que está trabado en la hebilla, este tipo de cinturón tiene una placa de seguridad que no permitirá que la parte del cinturón que está en de regazo se afloje. El cinturón se ajusta tirando con fuerza de la parte del hombro del cinturón del vehículo mientras empuja con fuerza el asiento para automóvil hacia abajo.
Para instalar la traba de seguridad: 1. Ajuste el cinturón trabado empujando con fuerza el asiento para automóvil hacia abajo y tirando con fuerza el cinturón del hombro. 2. Mientras empuja el asiento hacia abajo, apriete las dos correas juntas detrás de la lengüeta de la hebilla. Destrabe el cinturón sin permitir que se mueva. 3. Conecte los cinturones del hombro y de regazo como se indica . 4. Vuelva a poner el cinturón en la hebilla. Verifique que el cinturón de regazo no se mueve tirando con fuerza.
Con LATCH Los vehículos nuevos pueden tener uno o varios asientos equipados con sistemas de anclaje LATCH. Si el vehículo viene equipado con LATCH, se pueden ver los puntos de anclaje inferiores en el pliegue del asiento del vehículo. Si no están visibles, pueden estar marcados con el símbolo que sigue . Vea el manual del propietario de su vehículo para informarse sobre las ubicaciones exactas, la identificación de los anclajes y los requisitos de uso con el sistema de seguridad para niños.
6.0 Uso del asiento para automóvil CON arnés incorporado 6.1 Colocación de las correas del arnés NO AJUSTAR DEBIDAMENTE LAS CORREAS DEL ARNÉS DE SU NIÑO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Ajuste apretadamente los cinturones provistos con este sistema de seguridad alrededor de su niño. Una correa bien ajustada no deberá tener nada de huelgo. Se mantiene en una línea relativamente derecha sin combarse.
4. Verifique la correa de la entrepierna. Elija la posición más cercana pero no debajo de su niño. Para mover la correa: Debajo del asiento, empuje el retén metálico hacia arriba por la ranura de lado . Coloque el retén en la ranura apropiada. Tire de la hebilla para asegurarse de que esté bien sujeta. 5. Las correas del arnés deben pasar por las ranuras a la altura o apenas por encima de los hombros . 6. Si las correas están en las ranuras correctas, vaya al paso 11 de la página 21. 7.
8. Tire los extremos de las correas a través de las ranuras y vuelva a insertarlos en las ranur as correctas como se determina en el paso 5, página 19. 9. Vuelva a montar las correas en la placa de unión metálica exactamente como se indica . Verifique que las correas estén completamente dentro de las ranuras. 10. Verifique que las correas se inserten al mismo nivel y que no estén dobladas. Tire del arnés para asegurarse que esté asegurado.
11. Ajuste del arnés Suelte las correas oprimiendo completamente el botón rojo de ajustes en el lado delantero del asiento y tirando de las correas hacia fuera en los hombros como se indica . (Vea también la Sección 6.3, Asegurar a su niño en el asiento del automóvil, página 26.) RECUERDE verificar las correas para la entrepierna y del hombro a medida que su niño crece y muévalas a la posición siguiente cuando sea necesario.
6.2 Asegurar el asiento para automóvil en su vehículo NO AJUSTAR DEBIDAMENTE EL ASIENTO PARA AUTOMÓVIL EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Cumpla detenidamente estas instrucciones y las del manual del propietario de su vehículo para asegurarse que el asiento para automóvil esté debidamente ubicado, colocado y asegurado apretadamente en todo momento. 6.2.
4. Ajuste el cinturón de seguridad del vehículo Empuje con fuerza hacia abajo con la rodilla o la mano libre en el medio del asiento para automóvil . Luego tire y ajuste el cinturón del vehículo. Para obtener más información sobre cómo ajustar el cinturón de su sistema del cinturón de seguridad, vea la Sección 5.2, Requisitos del cinturón de seguridad del vehículo, páginas 12 a 17, o el manual del propietario de su vehículo. 5.
6.2.2 Con LATCH 1. Para facilitar la instalación, extienda el LATCH hasta el máximo. 2. Coloque el asiento para automóvil firmemente contra el respaldo del asiento del vehículo mirando hacia adelante. 3. Pase el LATCH por el recorrido del cinturón que normalmente se usa para el cinturón del asiento del vehículo . El cinturón debe mantenerse en posición plana sin torcerse. 4. Enganche los conectores a los sujetadores inferiores. Tire firmemente de los conectores para asegurarse que estén enganchados . 5.
7. Todas las posiciones del asiento LATCH tienen puntos de anclaje. Asegure la parte de arriba del asiento usando la correa la soga. Vea la Sección 8.1 Uso de la soga página 31. Cuando no se usa el anclaje, engánchelo en la barra de almacenamiento del anclaje ubicada atrás del asiento para automóvil. 8. Verificación de seguridad para una instalación segura Realice esta prueba cada vez que viaja con su niño.
6.3 Asegurar a su niño en el asiento del automóvil NO AJUSTAR DEBIDAMENTE A SU NIÑO EN EL ASIENTO PARA AUTOMÓVIL AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. En un accidente, el asiento para automóvil NO ofrece protección a su niño a menos que las correas del arnés estén debidamente aseguradas. Cumpla estas instrucciones detenidamente para asegurar debidamente a su niño.
3. Tire de la correa de ajustes para apretar el arnés . 4. Asegure la traba del arnés . Coloque la traba del arnés en el medio del pecho del niño, nivelado con las axilas. 5. Asegúrese que las correas estén planas y ajustadas contra los hombros del niño. Una correa bien ajustada no deberá tener nada de huelgo. Se mantiene en una línea relativamente derecha sin combarse. No aprieta la piel del niño ni pone al cuerpo del niño en una posición poco natural .
7.0 Uso del asiento para automóviles sin arnés incorporado NO AJUSTAR DEBIDAMENTE A SU NIÑO Y LA ASIENTO PARA NIÑOS EN EL VEHÍCULO AUMENTA EL RIESGO DE LESIONES SERIAS O LA MUERTE EN UNA CURVA CERRADA, PARADA REPENTINA O ACCIDENTE. Debe usar siempre el cinturón de regazo/hombro del vehículo para asegurar su niño y el asiento. El LATCH no asegurará su niño al asiento para automóvil.
7.1 Eliminación del arnés 1. Quite las correas de la placa de unión metálica. Vea la figura 5 en la página 19 para más ayuda. Tire de las correas por las ranuras del arnés. No quite las hebillas ni el gancho del arnés de las correas . Empuje las correas, las hebillas y el gancho del arnés por el fondo del asiento. 2. Saque la correa para la entrepierna. Vea la figura 3 en la página 19 para obtener más ayuda. Abroche la correa de la entrepierna al arnés y conecte el gancho del arnés para su almacenaje. 3.
7.2 Asegurar al niño y la asiento para niños en el vehículo 1. Coloque el asiento para automóvil mirando hacia adelante y firmemente contra el respaldo del asiento del vehículo equipado solamente con un cinturón para el hombro y de regazo. 2. Si desea usar la correa de la soga para mantener el asiento en su lugar, asegúrela ahora mismo. Vea la Sección 8.1 Uso de la soga, página 31. 3. Coloque al niño en el asiento para automóvil con la espalda del niño plana contra el respaldo del asiento para automóvil. 4.
8.0 Información adicional 8.1 Uso de la soga Todas las posiciones del asiento LATCH tienen puntos de anclaje. Si desea usar la soga, consulte el manual del usuario de su vehículo para determinar los lugares. Si su vehículo no está equipado con un sujetador de soga, podría ser posible instalar uno. Contacte al concesionario de su vehículo para determinar el lugar correcto del sujetador y su instalación.
8.2 Almacenamiento del LATCH 1. Para facilitar el almacenamiento, extienda el LATCH hasta el máximo. 2. Ubique las barras de almacenamiento en la parte de atrás del asiento para automóvil . 3. Ajuste los extremos de LATCH en las barras de almacenamiento como se indica. 4. Después de ajustarlo sobre la barra de almacenamiento, tire el cinturón de ajuste para asegurarse que el LATCH esté debidamente ajustado. 5. El almacenamiento del LATCH debería tener este aspecto cuando esté terminado .
8.3 Uso en aeronaves Este sistema de seguridad ha sido certificado para ser usado en vehículos automotor. Ha sido certificado para uso en aeronaves SOLAMENTE cuando se lo usa con el arnés incorporado. Cuando se lo usa como asiento para niños sin el arnés, este sistema NO ha sido certificado para ser usado en aeronaves porque no hay cinturón del hombro disponible. Puntos importantes que recordar: 1. Las aerolíneas tienen ciertas restricciones sobre el uso de los asientos para automóviles. 2.
8.4 Accesorios (ciertos modelos) Nunca ponga objetos filosos o con punta en el apoya vasos. En un accidente, estos objetos podrían golpear a su niño y causar serias heridas. 1. Inserte las dos clavijas del apoya vasos en las dos ranuras del costado izquierdo o derecho del asiento . 2. Empuje el apoya vasos hacia abajo hasta que la traba se asegure al fondo del asiento . VERIFIQUE que el apoya vasos esté seguro tirando del mismo.
8.5 Uso del pie de reclinación (en ciertos modelos) Algunos modelos vienen con un pie de reclinación en el fondo del asiento. 1. Para usar el asiento reclinado: mueva el pie hacia la parte delantera del asiento . 2. Para guardarlo: mueva el pie hacia la parte trasera del asiento .
9.0 Cuidado y mantenimiento • USO CONTINUO DEL ASIENTO PARA AUTOMÓVIL PODRÍA CAUSAR DAÑO AL ASIENTO DEL VEHÍCULO. Use una estera para asiento del automóvil, toalla o frazada fina para proteger el tapizado. • PIEZAS DE METAL Y DE PLÁSTICO: limpiar con un jabón suave y agua fresca. NO USE CLORO NI DETERGENTES. • CORREAS DEL ARNÉS Y CORREAS DEL LATCH: limpie el lugar sucio. No sumerja las correas en agua. Hacerlo podría aflojar las correas. • AJUSTADOR DE LA HEBILLA Y EL ARNÉS: limpiar con un trapo húmedo.
Para sacar la funda del asiento 1. Quite las correas del arnés y de la entrepierna (Vea la Sección 7.1, Eliminación del arnés, pagina 29, para ayuda). 2. Quite los bucles elásticos y los ganchos del asiento como se indica . 3. Debajo de la parte delantera del asiento, oprima la lengüeta para quitar la placa del botón de ajustes . 4. Ponga la placa de ajustes de lado y pásela por el agujero en la funda del asiento . La apertura es muy estrecha, así que asegúrese de no romper la funda. 5.
Para colocar la funda de nuevo 1. Para colocar la funda de nuevo, siga los pasos anteriores en orden inverso. Empuje la placa de ajustes y la correa por el agujero en la funda. Asegúrese de no romper la funda. 2. Inserte las dos lengüetas de la placa de ajustes en la parte trasera del agujero del asiento . 3. Empuje la tela hacia arriba para que la lengüeta debajo de la placa de ajustes quede debajo de la tela . Encaje la placa de ajustes de nuevo en el asiento .
4. Pase las correas de arnés por los agujeros apropiados en la funda del asiento. Vea la ilustración a la derecha y en la sección 6.1, "Colocación de las correas del arnés" (página 18) para volver a colocar las correas del arnés en el asiento correctamente . 5. Sujete la funda al asiento volviendo a colocar los bucles elásticos y los ganchos en el asiento.
10.0 Piezas de repuesto Cómo hacer pedidos: Complete el formulario que sigue. El número de modelo de su asiento para automóvil DEBEN incluirse en el formulario para asegurarse que recibirá las piezas de repuesto correctas. El número del modelo puede encontrarse en una etiqueta ubicado abajo de su asiento para automóvil. Debe incluir el pago con su pedido. También se pueden solicitar las piezas del sitio web de Graco en www.gracobebe.com. Lista de piezas: . . . . . . . . . . . .Precio:* Traba de seguridad .
Model No. • N° de modelo ( Number Required/Se requieren número) Total • Total: Locking clip/ Traba de seguridad Harness strap with buckle tongues and harness clip/ Arnés con hebilla y traba del arnés Seat cover/ Funda del asiento Crotch strap w/buckle/ Correa para la entrepierna Shipping & handling*: Gastos de envío*: $5.00 Sales tax**: Impuestos**: Total due Total a pagar: *$15.00 outside the continental U.S. *US$ 15,00 para fuera del continente de EE.UU **CA 7.25%, IL 6.25%, IN 5%, NY 8.25%, OH 5.
Guarde este manual en el compartimiento de almacenamiento en el respaldo del asiento para automóvil.
HEAD SUPPORT INSTRUCTIONS INSTRUCCIONES PARA EL SOPORTE DE LA CABEZA For use with top and middle harness slots only! Use head support in slot ABOVE harness, NOT in the same slot with the harness. To prevent ejection in a sudden stop or crash: • Use proper harness strap shoulder slots. • Keep harness straps positioned on shoulders and adjusted snugly. • Do not use strap covers, blankets, cushions, or padding under harness straps or child unless provided by Graco. See car seat instruction manual.